Viewing all customer Discussions for:

90-237 Face Mount Keeper, 1"

Hello, Hoping you might be able to help me find a replacement for the keeper shown in the photo above. These replacement windows were installed before we owned the house. No documentation or brand labeling was left or is on the windows. The mount spacing on the keeper is 1 3/8 and the lock spacin ... (cont.)

I am looking for a replacement recessed sash lock like the one in the attached photos. Please let me know if you have them and if not please let me know where I might find it. The screws on the keeper I need area about 1.5? apart. Does any of the information on the sticker lead you to anything? ... (cont.)

Need 8 lock plates

I cannot find the manufacturer name. The mounting holes are 2 1/16" on center for the latch and 1" on center for the strike. It is white. The measurement from the mounting hole to the front edge of the latch (cam side) is approximately 7/8" My understanding is that the window manufacturer is no lo ... (cont.)

Hello,these are for the same type of window as my previous order which included "Top tilt corner latch product code 26-111" which was a perfect fit for the bottom sash. I am not able to find these other parts on your website. For the pivot, I could just use the metal pin piece since the plastic pa ... (cont.)

Im hoping you can help me. I recently purchased a house with 8 windows that aren't staying open. After examining the problem, it looks like the counterbalance spring pivot point is broken off the assembly. It look looks like the plastic piece at the the bottom of the counter balances are broke. ... (cont.)

12895 with an letter R on the right 77 3

The bead,is 3/4 on one side 1 inch and eight on other snap in bead.

Hello, Wanted to see if you could identify a replacement here. Need about 4 of them. Window is marked as Phillips. Thanks!

Hi, I am trying to find the hardware latch for my window. I don't know the brand name of the window. Do you sell the hardware latch? Thanks David

I am looking for a face mounted keep for a double hung window The bolt spread is 1_1/2 inches.

One of my windows is missing the "keeper" I think it is what it is called. From dead center to dead center of the screws is 1 inch.

Sorry I can get a pic with it removed if needed. There are 2 of these per window. I need 2 of them

Hello I am looking to replace 2 of these flush mount dash lock keepers. My windows are almond/beige in color but I can be flexible if you can help me find the right size part. The piece has a number printed on it, 40640. Please let me know if you have a part I can use to repair my broken window. ... (cont.)

I seemed to have misplaced part of the locking mechanism for one window. All I would need is one. Thanks. See photo for exactly the part I am talking about. Need screws too and they are Alcoa windows.

That is what is on our 23 year old apartment building Has settled We are trying to find the keeper that would be a little taller or adjustable ? Thank you

Do you have this window sweep lock? Mounting holes on the sweep are 2-1/4"

Please see if you are able to supply window lock & keeper or suggest substitute. Thank you

Hi, I have 3 window keepers that are broken. They seem to vary in size. Any help?

some windows need replacement of the pieces shown in attacjed