Viewing all customer Discussions for:

95-150 Malta Window Corner, LH

I ordered the Lhr and rh Malta units and need to order the bottom corners. Will the 95-292 work for the two bottom corners? I also want to order new aluminum rails and I don't see where you offer the rails. Can you suggest where I could find rails to fit the 3/4x7/16 Malta corner pieces? ... (cont.)

I have done a lot of searching, but can't find screen frame corners that match my frames. When I look, the dimensions are either obviously incorrect, or there isn't a dimension listed. My corners have legs (that go into the frame) that are 0.4" thick by 0.5" tall. Both legs are the same size. The c ... (cont.)

I need several of the screen latches in the corner pieces

The screens are for Malta windows. The screens are meant to be installed from inside the house. One holds the screen out horizontally and fits the corner slot over a pin. When the screen is lowered to fit the space, the pin goes into the groove on the Slot. Over time, some of these slots have br ... (cont.)

Hello Looking for replacement corner keys for Superseal double hung screens Attached is the photo leg is 5/16 H... 7/16 W... 1" LONG flange area is 1" there are L and R corners as well as non tabbed Appreciate all your help AL

Hi, my house was built in 1994. We have Malta windows throughout. The clips and corner pieces on my screens are crumbling. The screens themselves are fine. I am hoping that you can suggest what I should do. Also is it possible to replace the parts without taking apart the screen? I would appreciat ... (cont.)

The recess sits in a pin that locks the top of the screen into the window. I have not been able to locate a label for the windows.

I'm trying to find these parts right side and left side. I already bought the 95-151 and 95-150, not the same.

There are no markings if any type on the corners. The top corners have the slots for the nail

My Malta screens hinge at the top by fitting a notched corner piece over a peg on each side the just from the window frame. The corners you show here look like the ones that don't hinge at the bottom of the screen. Attached is a pic of what I have. The bottom of the screen simply attach via a Malta ... (cont.)

'This is the original corner compared to swisco part 95-150 and 95-151. Seems my screen frame is smaller. Any help would be appreciated.

DO you have a coner for a screen that is attached? If so how do I go about purchasing that? Please review the attached pictures Thank you in advance for your help Chris

Hi: I need some screen corners. Using your illustrations, it is not intuitive either how I need measure to determine the needed dimensions or whether what you have satisfies my requirement. the dimensions of the frame outside edge are 7/16" by 3/4". Thanks so much for your prompt response. I have ... (cont.)

Do you have a replacement for 95-150 and 95-151?

1/2' or 9/16" Malta window screen frame corners top white plastic corners with bout outs or stationary pin. a slip fit into end of the screen frame.

I need Malta window screen frame cornets 5/16 in size

I recently received #95-150 and 95-151 screen corners. The part that goes into the alum frame is to large for the frame. The one that is in the screen now is shaped like the corner on 95-052. However 95-052 does not appear to have the channel to hold the screen on the hanging pin. Help. Jo ... (cont.)

Malta Window Corner 95-150 LH & 95-151 RH for a 7/16th frame. If you refer to the picture on your website, the side that shows a 3/4" is 11/16" on my screens. Are the smaller keys available? Pull Rings 70-004 These are 1.5". Are 1 inch pulls available. Aluminum screen frames - Is the alumi ... (cont.)

On my Malta screens, the corner piece to hold the pin is broken. Is the 95-150 corner piece shown here used to fix this? If so, how are they installed? The screen is in tact.