Viewing all customer Discussions for:

20-006 Four Piece Crestline Clutch Set

The part on the left attaches to the sash and catches the part on the right which is on the end of the spring inside the jamb liner

Two items front and rear photos

Hi-I have these wood windows and some of those plastic side channel rails are needing replaced. The left ones compress into the frame pockets via a spring metal strip. Right channels are just screwed to frames. Sashes are removed just by shoving them left then popping out. Any thoughts? Will be need ... (cont.)

I need balances and clutches for my windows. Can you help?

Please find attached pictures of the parts I need for my andersen window

These are from a double hung window in a modular home that was built in the late 1970's. They attach to a spring balance and then latch into a slot on the window, there are 4 on each window and it appears all for are different, left and right side are different and inner and outer windows are differ ... (cont.)

There are many of these broken in my windows. The windows are from the 1970s era. I am asking if there still are duplicates or some other type to use. Thank you.

I have 1980's vintage Crestline single pane double hung windows. The balance springs and sliding connection at the end of the springs are breaking. Are these parts still available? If not is there a replacement mechanism that can replace these old ones? Thanks for your help Vern

Need plastic part For 2 windows. There are 4 to a window.Henry

I am seeking parts for my non-tilting, double hung windows that were installed in the late 80's or early 90's. The windows have vinyl jamb liners with nylon guide-stops and 18" tension balance springs. Manufacturer is unknown.Several of the nylon guide-stops are broken and I'm seeking replacements. ... (cont.)

I need the small plastic part hooked to the spring

The plastic bit that holds my windows up has broken on about 6 or more of my jambs.I am lookin for a replacement or alternative.No name or Number on windows. Built 1978.ThanksSteve C.

Crestline doublehung window (Crestopane 75-85) We have the springs which are ok.

HI!Looking for replacement part for Crest-O-Pane 77-87 Window Bottom Spring Hardware that attaches to Sides of Window. My house was built in 1978 and I have several Crest-O-Pane windows that have broken plastic spring holder hardware that is located at the bottom of the spring. Looking for parts to ... (cont.)

Looking for the plastic slides with the metal spring loaded swivels that grab the plastic guides in the window jamb

Each window requires these four spring actuators. The problem is that over time the nylon becomes brittle and cracks. The only name on the window that I can remember is ROWE, maybe. Over fifty years old. Thanks for taking a look' George

I have 10 wooden sash windows installed around 1968. Although 50 years old, they are good windows. I have been unable to locate any name or other identifying information on them. One photo is an overview of this type of window. They do not have weights for counter balance, but instead have sp ... (cont.)

My house was built in abt 1975 with what I believe are Mercer double-hung wood windows. I need to replace some broken spring balance shoes that fit inside the vinyl sash (see attached pics). The springs are in good shape still - just the plastic piece is broken on some of my windows. Mercer was acq ... (cont.)

See photo of a window track with all parts intact. See another photo of parts removed: a spring and a broken plastic part. Do you have replacement parts for the spring and the broken white plastic piece (clutch)? My house was built in 1979. Inside the metal window frame between the layer ... (cont.)

I am looking for a replacement window balance catch for my double hung window.If I can't replace just that part is it possible to replace the side rails & install new window balance system in the existing windows?PSThere aren't any mfg numbers.Please let me know.Thank youKeith ... (cont.)