Viewing all customer Discussions for:

21-001 Bi-fold Door Pivot Assembly

I am looking for part for old bifold metal closet doors. The back of the doors says For further information or spare parts write: P.O.box AC, City of Industry, Calif. 91749 [Refer to Model "C" Door]. I have a house full of these type of closet doors and they struggle to open smoothly. I think I ne ... (cont.)

total length 6.5 inches

Hello, I am looking for this piece for 1993 bi-doors. Can anyone help me? Thank you.

The product number on the label on the doors is BJJDFG. Attached pictures of the guide pin and clamp. All clamps have cracks in the plastic but I am not missing any parts otherwise. I am also interested in replacement track bumpers. I have 11 doors that require new pin clamps on 6 closets. 5 have do ... (cont.)

I have a Slimfold, 60 inch, 4 panel metal bi-fold door which needs a new lower track. The old track is 11/16" wide and 11/16" high.

Bottom connector to the guide in the floor. The top of the long rod has a slot to adjust the height of the door with a straight screw driver. No manufacturer's name o Rd number is available. The door is about 26 years old.

How can I hang this type of door without putting a track on my vinyl floors? What is the part number for the Pin with the spring at the top of the door?

Hi, we have a mirrored bifold door that is about 6'6" high x 5' wide. I am guessing it weighs 50 lbs. In the midst of a remodel, it appears that I have lost the lower pivot pin bracket. I am attaching a picture of the pivot pin to give you an idea of the system I need. It has a 5/16" thread and a ny ... (cont.)

We have a mirrored slimfold model E door going into a small walk-in closet. The bottom inside pin constantly shifts in toward the closet edge, making it nearly impossible to get the door opened or closed. Not sure what parts we need. Am reasonably sure we need new bottom pivot pin and possibly ... (cont.)

Hi I have bi-fold metal doors, 3 feet (1 door), 5 feet (2 doors) and 30 inches (1 door). I am going to replace all the pins and tracks with your help (of-course). Can you tell me the parts needed. Thanks P.S. I researched on SWISCO.COM and I placed an order (1139482) based on what the parts for on ... (cont.)

older Slimfold door. Bottom pin is just a pin and there is a clamp piece to hold it in place. I have a number of pins, but none have the screw slots at the top, so I need to replace these. Could it be the 21-001 even though it seems to have more parts to it? Need top and bottom replacementsmaybe ... (cont.)

Hi, I need replacement pins for some old Slimfold Model E closet doors (see pictures). I think I'm supposed to have three retractable and one stationary, right? I sent pics of one of the two doors. What do you think? Thanks!

I would like your pointing me in the right direction for these parts, Anthony

House was built 1990 thank you Stephen

I need two tracks 10 feet long for the ceiling and two tracks 10 feet long for the floor And 22 pivot lock One 3 feet ceiling track & One 3 feet floor track

Hi, my name is Maddy. I have a few metal doors that need new hardware but I'm not sure which one are the right ones and local hardware store does not not carry. can you please advise me on what I will need to make this doors work like new? I will appreciate your help on me placing an order to find w ... (cont.)

I need to replace two metal bifold door pins that have gone missing since the property was built in 1962. This is a photo of one of the remaining pins. Please let me know if you have these parts, and their numbers in your inventory, if you have them. Thanks.

Hi, I'm trying to re-use old bi-fold metal louvered closet doors after a renovation where the workmen damaged the bottom tracks removing the doors. The pictures I've sent are of the label from inside one of the closet doors and 2 views (both sides) of one of the bottom tracks. I need tracks for ... (cont.)

I need replacement parts for Slimfold BiFold Louvre doors. Please review the picture of the parts and advise regarding which replacement would best suit my needs. Many thanks. Regards, Louise

I have bifold doors that are badly in need of replacement parts. The doors do not stay on the track and are very difficult to open and close. I have attached pictures of the doors with the hardware exposed. These are model E doors.