Viewing all customer Discussions for:

21-007 Bifold Door Guide Pin

I need the piece that hold the door shut on top rail

I need the one spring and two plastic grommets for bifold door.i need one(1)spring and two(2) plastic grommets. Thank You.

Do you have replacement parts for these doorstep? If so, What are your part numbers for the parts shown on these doors?

These doors are likely from the late 1970's. The slide I need is missing altogether so I can't send a picture of it out. This picture is the door slide is if the second door of the pair. It is about 5.5 inches long. Thank you for your help.

Hello, I'm trying to identify the parts I need for my mirrored bifold doors. I ordered what I thought were the right parts from your firm (item shown on the right in the photo), but it doesn't appear to be the right thing. My part is on the left; your part is shorter than mine and has some plast ... (cont.)

Good Morning, I am looking for some steel bifold door hardware as in this picture. I am located in Canada and am wondering if there is somewhere in Canada I can order from. I work in an apartment building where these doors are probably 40 years old and some of the hardware is starting to fail. I ha ... (cont.)

I receive the cap, but it will not fit. I thought I had right size. Please let me know if I can return this and get correct one. Please see attached pic and let me know what I need. I also order your 21-111 and that was just bit small and it would not fit. I have return both back. Lets try 3rd time ... (cont.)

First two pics are of the broken bottom pin. Last pic (on the right) is from another door that is not broken. Can you help? Doors are from about 1973 vintage. Thanks. Helen

Nylon missing on guidance track pin. Door catches unexpectedly while closing/opening

We are trying to install a set of used doors that are 36 inches wide and we need to have the tracks that will fit the three eights inch pin on the doors

Please send me info on this, it attaches to a guide rod for a metal "B" door. Thank you.

Hello, this is the pin that keeps the door on track when opening. Please let me how to order it. Thank you

I am trying to find replacement parts (see attached photos) for the bottom Pivot pin that allows me to raise the door up off the floor. It measures 5.25" long, is threaded on the bottom and has a Groove on top for a standard screwdriver. The pin diameter is about 1/4". I need 8 of them ASAP ... (cont.)

I would like to get all new tracks and hardware that sits inside the tracks for my 48" metal bifold closet doors. I have 5/16 inch pins and plan to reuse those. Can you take a look at the attached photos and let me know what you recommend? The bottom track is 1 1/8 inch wide measured from the out ... (cont.)

Dear Sir or Madam,I am trying to identify and purchase parts in order to get metal bifold closet doors operating correctly in a homre that was built in 1970. I found an address to order parts from but I doubt if this is still valid. The address isPO Box 666Roseville, Michigan The tag states to refe ... (cont.)

Spring loaded door pins - 6.5" - 6 pcs Plastic sleeve for above pins - 4.5" - 6 pcs Pivot pin with retaining screw - 5.75" - 2 pcs Picture provided is the parts for one bifold door. I need parts for 2 doors. Thank you, Harry

Hi. Bought the home . No clue of manufacturer or when they were put in. No one seems to know 1. How to replace or 2. Where to get the parts. Gosh, I hope you can help! There are a bunch of these in the house so I assume will happen again. (The top one had a plastic cap.) Pix below. Thank you for you ... (cont.)

Manuela, thanks for the quick response. I sent 3photos two are the top and bottom of the door. Using a caliper the diameter of the guide is 0.3700 inches and the rails are 0.3870 on the average. Since I have new rugs installed I think replacing the guide caps and springs are my best option. The oth ... (cont.)

Hi Frank. I recognize these parts from old Slimfold bi-fold doors. For a bottom threaded pivot pin, see the 21-001. For the guide pin, see our 21-007. The clamp can be replaced with our 21-154. If you need bumpers, see our 21-277. Look over all parts to confirm that they match your old components. W ... (cont.)

looking for 10 of these