Viewing all customer Discussions for:

21-007 Bifold Door Guide Pin

total length 6.5 inches

Hello, I am looking for this piece for 1993 bi-doors. Can anyone help me? Thank you.

The product number on the label on the doors is BJJDFG. Attached pictures of the guide pin and clamp. All clamps have cracks in the plastic but I am not missing any parts otherwise. I am also interested in replacement track bumpers. I have 11 doors that require new pin clamps on 6 closets. 5 have do ... (cont.)

I have a Slimfold, 60 inch, 4 panel metal bi-fold door which needs a new lower track. The old track is 11/16" wide and 11/16" high.

Bottom connector to the guide in the floor. The top of the long rod has a slot to adjust the height of the door with a straight screw driver. No manufacturer's name o Rd number is available. The door is about 26 years old.

How can I hang this type of door without putting a track on my vinyl floors? What is the part number for the Pin with the spring at the top of the door?

Hi friends,We are facing difficult times with our metal doors in two of our buildings. We are a non profit housing organization called MTR - More Than a Roof Housing Society and we wanna replace our tracks and pins (not the metal doors) by new ones, probably different ones... Today we use parts like ... (cont.)

Hi, we have a mirrored bifold door that is about 6'6" high x 5' wide. I am guessing it weighs 50 lbs. In the midst of a remodel, it appears that I have lost the lower pivot pin bracket. I am attaching a picture of the pivot pin to give you an idea of the system I need. It has a 5/16" thread and a ny ... (cont.)

We have a mirrored slimfold model E door going into a small walk-in closet. The bottom inside pin constantly shifts in toward the closet edge, making it nearly impossible to get the door opened or closed. Not sure what parts we need. Am reasonably sure we need new bottom pivot pin and possibly ... (cont.)

The mirror doors have top and bottom tracks. This is a photo of the spring-loaded top roller. I disengaged it from the track to show as full as possible a photo of it. As you can see, the spring doesn't lay flat, which results in the doors not 'meeting' evenly and making them hard to close withou ... (cont.)

Hi I have bi-fold metal doors, 3 feet (1 door), 5 feet (2 doors) and 30 inches (1 door). I am going to replace all the pins and tracks with your help (of-course). Can you tell me the parts needed. Thanks P.S. I researched on SWISCO.COM and I placed an order (1139482) based on what the parts for on ... (cont.)

I would like to purchase 3 of this. Can?t find it anywhere.

Hi, I need replacement pins for some old Slimfold Model E closet doors (see pictures). I think I'm supposed to have three retractable and one stationary, right? I sent pics of one of the two doors. What do you think? Thanks!

I would like your pointing me in the right direction for these parts, Anthony

Good day. Glad I found your site. I need to replace the 4 pins on each door because the old ones have worn out or broke. The plastic pin holders fall out or are broken. When I tried to reinstall with the old parts it was difficult to place properly. One of the top holders will only move a little way ... (cont.)

House was built 1990 thank you Stephen

We have a Slimfold Closet Door (two folding on each side/ four parts total) which is for our Manufactured House Washer Dryer Closet. The spring/pivot/"gizmo" which is on the track at the bottom, needs replaced, and I have no idea, how to find a part number or anything. The sticker, I saw just had "S ... (cont.)

I need two tracks 10 feet long for the ceiling and two tracks 10 feet long for the floor And 22 pivot lock One 3 feet ceiling track & One 3 feet floor track

I need to replace two metal bifold door pins that have gone missing since the property was built in 1962. This is a photo of one of the remaining pins. Please let me know if you have these parts, and their numbers in your inventory, if you have them. Thanks.

Hi, I'm trying to re-use old bi-fold metal louvered closet doors after a renovation where the workmen damaged the bottom tracks removing the doors. The pictures I've sent are of the label from inside one of the closet doors and 2 views (both sides) of one of the bottom tracks. I need tracks for ... (cont.)