Viewing all customer Discussions for:

21-030 Bifold Door Bottom Pivot, Peachtree

I have hard time to find this.part

I need help finding the replacement part for my bifold door. There seems to be a broken plastic retaining piece that keeps the spring / pin in place. Is this part of the 21-028 assembly or something else? also I'm missing the plastic cap that inserts into the top rail. Is that part of the assembly a ... (cont.)

I need, I believe barrel Springs, plastic clips, I need plasticcaps I'm missing the rod, plastic holding clips, I definitely need help with this project.

I need four bottom and two top parts do you have this type?

do you have replacement

Can you help me find out which door and pin assembly this is.

These are from an approximately 50 year old bifold closet door

Looking for replacement hardware for these old metal bifolds, I have 5 doors Thank you!

So looked for a manufacture can not fond any on the door. I know the house was built in the late 60's. I saw your other post and don't know if those are the same as I don't have any way of mounting one of those clips as there are holes in the doors.I have 5 closet doors like this and all the hardw ... (cont.)

I am looking for a top pin for a metal bi-fold door. I included a picture of the bottom pin as well as whats left of the top pin. The top pin should have a spring on it similar to the spring on 21-091.

I am not sure the brand but I think this bifold may be from the 1970s. I have attached a photo of the top and bottom pivot rode as well as a door pin. Do you know what parts I need for replacement? Thank you

Need Help identifying these pivot pins. Please advise.

Folding door replacement parts...

Hello; The doors have both a square and round hole on both top and bottom of their outer edge. They were made in 1970. The square hole is 1/2 " x 1/2 ". I'm not sure of the diameter of the round hole but I think it is approximately 5/16ths. The top pivot pin (against the brown ba ... (cont.)

Parts needed for stratafold Bm 5, 9,10,17,18 (2 of each) I need the center top and bottom assembly for the metal bifold doors. STRATO-FOLD Division of Peachtree Doors Inc

I didn't find any markings on the doors. I want to replace the 4 pins & springs assembly.

I can not find the pivots that go in the track for my bi-fold doors at this senior residents community. I have 90 units with 5 of these doors a piece and would like to be able to get parts for them. There are no markings on any of the pieces. Thanks,

Hello, I need the rubber parts that keep the doors in the tracks. Here are pictures of my door hardware. Please tell me what to order. Also, here is a picture of the green label on the inside of the doors.

Hi, I have recently purchased a property with tall metal bifold doors and when the previous owner removed them they either lost or damage the hardware. I have salvage an example and need help. What products should I purchase and what else I might need to reinstall them. If you have any tips or trick ... (cont.)

I see your part numbers 21-029 Pivot Top,21-030 Bottom (Outside fixed I assume) covers both top and bottom on pivot side. And 21-028 covers the floater or inside, what part number covers the bottom "mate" of 21-028? I will thank you in advance for any help you can provide. Your speed and cooperatio ... (cont.)