Viewing all customer Discussions for:

21-048 Bifold Door Pivot, Leigh

Hi! I have a full vu bifold door that I can’t seem to get back on track. The door isn’t sitting high enough so it drags on the bottom and I can’t seem to things aligned. What parts might you recommend to help get this working again?

My kids room bi fold closet doors one side upper parts are missing. I added pictures and the model is S 914791. Which parts should I buy for this?

Hi. I need to replace this bottom pivot pin on an old 1975ish metal closet door. It's the bottom pivot pin which I included a photo of. It is 5 and 3/8 inch long and 5/8 inch wide. I need the bolt itself the nut, washer and flat lower nut parts. The pin has threads on top and smooth on bottom with a ... (cont.)

Hi, I need upper and lower guide pins for the metal bifold closet with the attached pictures.I am not sure of the size. I have 3 closets with the same issue. I am not sure if I need 3/8 inch caps or 13/32 inch caps or different sizes. Thank you very much.

Hi , I am trying to replace hardware ( 3- pins pivots etc) to fix "one)leigh full view bifold door.

My bifold mirrored closet doors are misaligned as you can see from images 01 and 02. The left door is little lower than the right door. I am not sure if it's a problem with the door or is it due to missing hardware. The hardware that is missing is in image 3. Not sure what do I call that, but is the ... (cont.)

Trying to figure out these parts for metal bifold doors

One of the bifold doors hadn't been working. In continuously lifting it up to close it I bent the top pin (the one with the spring). The door came off and comparing it to the one on the other side I definitely need the plastic "thing" as shown in picture 21-058. The only thing I see inside the doors ... (cont.)

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

From a 45 year old metal bifold door

Hello, We are struggling to find replacement pins for these 60s bifold doors. Pictured is the lower fixed pin. Helpppp!!Thank you, Alex

I am looking for a hardware kit or Pins, springs, caps to repair my 1970's FULL VU Bifold closet doors...Please excuse the dirt & dust! The tracks are completely fine but I need all hardware to repair/completely reinstall the bifold closet doors onto the existing tracks. I don't even know what ... (cont.)

Would like to buy hardware for the following 2 doors. Leigh Full-Vu Metal Bifold Doors. Attached find label of door. Pics of the 4 corners of the door. Do you have replacement tracks for these doors? I can see that a spring and cotter pin is missing but have no idea if anything else is missing. ... (cont.)

Hi, sorry I don't have better pucs at the moment. I was hoping you might be able to ID the door from these lower guide pin pics and provide a parts list for all the hardware. Or maybe point me in the right direction for how to ID them, I couldn't find a brand or anything. My parents and several of ... (cont.)

Need help installing bottom pin and metal closet door. There It's nothing holding it in place. It just drops to the bottom.

Hi, we purchased a 1967 mid-century home 10 years ago. In several of the rooms, the door systems need hardware and tracking system replacement. I've taken photos of one bedroom/office that is in the worst shape. Looking forward to receiving advice and guidance. Thank you, Patt

what do I need for bottom of my mirror door

Where can I get door pins and anchora for the full-vu closet folding door?

I am trying to help my father-in-law fix his closet door. My best guess is that it is a Leigh Full-Vu Bi-Fold door. The home was built in 75 and the doors are metal. The pins seems to be worn (possibly some broken parts). I was wondering if these four parts are what's needed to replace the four ... (cont.)

Pin hardware for 8 foot metal bifold doors. Need all hardware for 2 doors