Viewing all customer Discussions for:

21-048 Bifold Door Pivot, Leigh

For Leigh Full-Vu metal Bi-fold doors (see label photo), the pins & nylon parts are either missing or not holding due to wear, bending, etc. The pivot pins at the fixed ends appear to be fine. Your parts specifically say TOP. My question is whether the bottom pin assemblies that slide are identical ... (cont.)

Need replacement bottom pins and a couple plastic sliders for the bottom rails. Pic1 shows top pivot pin (which I have all of), pic 2 shows bottom of a door, pic 3 shows the one bottom pin and the plastic slider that it snaps into. The rail is at (or just over) 7/16ths inch wide. The pin is 5 1/4 ... (cont.)

I am looking for the pin that goes into Bracket #21-205 for the top of a Leigh Bi-Fold door. 5/16" dia Solid round bar x 5 1/4" long, No head on either end. Cotter pin hole drilled 3 1/4" from one end. I need 2 pieces. Thank you. Paul Wainwright

Building is built maybe in late 1960? I want to replace all pivot parts at top and bottom.

Hi, I want to replace all hardware on 3 of these bifold doors (including top and bottom tracks). The door openings are 4' x 8 '. All of the plastic clips are worn out and the tracks are beat up.

I need the top stationaries abd bottom and top pivits.

I have two sets of metal bifold doors that are old and don't work well. They don't stay in their nylon clips, are hard to open and shut, etc. I think the tracks are still okay, so I want to get all new pins, springs, nuts, and nylon clips for top and bottom rails (I assume you can replace those by r ... (cont.)

I wrote to you a few moments ago about missing parts I need for my 1970's metal closet door. Now I have taken some photos, hoping they may help. Two photos show another door that has all its parts and works fine. One photo shows the top of the door that needs to be fixed and the parts are missing, ... (cont.)

I've inherited some metal mirrored bifold doors with a house that I'm renovating and it's missing some of the hardware. I'd like to replace the footings that are in the tracks as well as they appear to be damaged (if that's possible without replacing the track). Looking for some guidance on all th ... (cont.)

The pictures show a pin which you have to push up and slide into the double-u shaped plastic slide. The doors are over 25 years old. I can't find the parts in any store such as Home Depot, Lowes, Ace Hardware and an old hardware store. I havae called every bifold door place and can't find the par ... (cont.)

Hello,As you can see I have part #21-205 bracket. I am missing the pin that goes with it. Are you able to let me know what part I need? Not sure if the diagram is helpful.Thank you,Eve

I need a replacement pin that was misplaced somewhere throughout the ownership of this home. It is the guy pinned snaps in the track at the bottom and slides from a set of bi-folding doors from the late 70s.

HelloI moved into a condo with metal closet doors. One door is off the track and someone has tried to fix in the past. I think they are from the 70s. I hope I don't have to replace the tracks top and bottom. Photos are of parts that appear to be in need of replacement. I don't see any numbers or mar ... (cont.)

I am looking for a bifold door bottom pivot, circa 1970, similar to your product code 21-048. The main difference is that the last 1/2 inch of the smooth section on mine is turned down to a diameter of 3/16 inch. The threaded section is 5/16 x 18. Do you have one that fits? Thanks, Al ... (cont.)

I'm looking for track parts fittings for the doors

I have a FULL-VU closet door composed of two bi-panel elements. To repair it I started to document each element: top pivot 5/16" top glide 1/4" bottom pivot 5/16" bottom glide 1/4" A very wise decision as there appeared to be only simple pins and such. Actually each of the four locations, a ... (cont.)

Hello, I need the top pivoting side of a leigh full-vu bifold door. I dont have the original one i am wanting to replace, though i believe the hole is 5/16th

My bifold doors to my bedroom closet will not close unless you lift up on it. I believe I need a new top pivot pin, but I'm not sure. The closest I found on your web site was #21-058. Is this what I need or something else to make it close properly? I don't notice any cotter pins missing, but maybe ... (cont.)

Need complete set of hardware to hang. Top and bottom. Track requires tapered nylon guides to fit.

one panel is sagging and is dragging on the bottom track. Was told it needs a new pin that will raise the door and lock it in place