Viewing all customer Discussions for:

21-100 Bifold Door Pin Cap, Benchmark

Hi - thank you so much in advance for your help! I have a wooden bifold door where the track is on the top (in photo), and the bottom is a pin (in photo). I am looking for a spring loaded top pivot pin as shown in the photos, and I am unsure what parts exactly I need to purchase in order to recreate ... (cont.)

I need the cap for the pin in the photo.

Pin diameter = 1/4" Pin height = 9/16" Pin cap inside diameter = 1/4" Pin cap outside diameter 6/16"

21-100 is perfect but the inside diameter needs to be 5/16 outside 7/16.From flange to bottom 12/16. Thanks a bunch..Tom

Looking for this part for hanging closet door. Light door older hardware.

I have a few sets of bifolding doors that I need lower replacement parts for. The current parts and door photo are included.

HiThe 4 pics included are of an 8' metal bifold in a home I am helping out in. (Elderly folks....). I am not familiar with this type of hardware, and also, I don't see how to remove the old hardware. There are what appear to be brackets welded on to the door and the pins etc seem to be press fitt ... (cont.)

Looking for the part to repair my closet doors. The large part of the cap is approx 5/8" and the total height is out the same with the hole on the large side?. Looks like 3/16". Help!

Need to replace broken cap or assembly on metal bifold door. Mirrored door

I need to replace the pins in both bottom and top of my closet doors. I c cant find replacwment parts here locally.

I have Google searched these for 2 weeks, and cannot find any information on them. My partner and I recently bought a house, and 3 of our closets have these beautiful older-style bifold doors. The problem is that we have no way to pull them out to paint them without removing the whole bracket that ... (cont.)

I need new nylon bushings for 16 doors. Not sure if caps are a 21-104 pin cap. Can you please advise me. Thanks Jeff

Hi there, I can't seem to find replacement pivots for an old steel mirror bi-folding closet. The base is 7/16 but my track opening is 3/8, which means the nylon has to be somewhat smaller.

I need to replace these on one of two doors on my closet. Do you carry them?

I'll be ordering some 21-044 pins, 21-100 caps, and 21-163 grommets for a Benchmark Bi-Fold steel door; but I need one more component for the '4th corner' of the door for a total rebuild. I'd call it an "Adjustment Mechanism" as shown on attached photo. Do you have this item in stock? Let me know pl ... (cont.)

Need two end caps. Don't understand some assemblies have rubber washers and some don't. Are they necessary if the spring clip is on the shaft? Don't know if you sell the individual parts for the shafts or just the shaft and all accompanying parts. Let me know.Thanks,Marvin

I ordered some parts from swisco recently and now I need a couple more but I'm having trouble finding what I'm looking for on your website. Parts I had ordered were 21-044 and 21-250 and 21-100.

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

The peg on top loses its spring (even replacements from Home Depot) and roller dusk on top won't stay in track. Peg/pin on bottom will not stay in hole/bracket on floor. There is no track along bottom of any. We have eight closets like this. Most with double bifold sliders. I love them. My husband's ... (cont.)

Pocket door lower track pin guide, nylon housing with a spring loaded pin inside, recesses into solid wood door, housing is 1 inch, pin is 2 inches overall height, attaches with 2 small screws holes are 7/8 inches apart, bottom mounting base is 1 1/4 x 1/2