Viewing all customer Discussions for:

21-117 Bifold Door Pin Cap

Hi. I need replacements for 2 of the spring-bearing guides. My pivot ones are ok. I just do not know which ones to order.

Looking for these white plastic guides that attach to the top and bottom slide pins. Any help where I can get the plastic cups or the whole pin would be greatly appreciated.

We have 5 metal bifold doors that are 98" tall ,our house was built in 1977 do you have replace ment pins and caps . The pins Top are 1/4" x4 and 3/4 long and bottom pins are 1/4" x 5" long. Also do you have a distributor in Canada? Thanks for you help John

Help! I love my steel doors but various parts, like the bottom pivot bracket, are breaking or missing. I need help finding ALL parts for these doors as a lot of parts are missing for them to be operational. I have included pictures of the parts that I have. I don't need the track or hinges. Hopefull ... (cont.)

Hi. we need 8 metal bifold door pin caps for our closet doors in our home. The hat bushing brim is 5/8 inch diameter and the hat bushing fits in a 13/32 diameter hole. It has a 1/2 inch overall height, it has a 1/4 inch hold in the center. Please let us know the part number so we can order it. ... (cont.)

I need about 6 of these guide pins so I want to make sure I get it right. Can you help identify the correct pin? As you can see from one of the photos, the current pins (or the broken pins) were 4 1/2 inches long. These are metal doors, fairly old in my estimation. I'm sorry that some of the photos ... (cont.)

Hello, I need the rubber parts that keep the doors in the tracks. Here are pictures of my door hardware. Please tell me what to order. Also, here is a picture of the green label on the inside of the doors.

pin is steel i/4" diameter, 4 1/2" long including nylon slider cap. Pin has two grooves 1/2" apart around the middle encircling pin is a spring 1 3/4" long, 5/8" in diameter for 1" narrowing to 3/8" at the othe end the spring floats free on the pin in the door channel through which the pi ... (cont.)

Here is a picture of the bottom pin. It is the wrong one as it is too small for the groove. It should be 13/32" wide to fit the groove. Can you help?

I have Stanley bifold sliding wardrobe doors (mirrored). I need at least four thimble like cups on which the doors sit - top and bottom - I don't know the name of these cups or part numbers. HELP " Kevin.

I have 1983 mirror bi-fold doors from Floataway and 3 onf the handles or pulls have been broken and for the past 4 years (all over the world) have been trying to find something that will fit , to no avail...My handles are plastic silver and are screwed in, on the fold of the door.. Can you pleas ... (cont.)