Viewing all customer Discussions for:

S751-23 23" Series 751 Channel Balance

Can you please help identify the part? Thanks

Looking to replace these. 1/2 in thick 23in long. The pivot shoes were old and stuck closed

Hi,I have 7 Marvin Windows - all were installed in 1986 when we built the house. All are the same except the sizes. The sashes tilt inward and can be removed for cleaning.Lets start with just 1 window:The metal in the window is stamped with: "Marvin-01-IGCO r CBA 86" (see picture).The Balances ... (cont.)

Hi, I'm in search of the attached window balance's. Windows didn't have any identification branding. Is this something you could help me locate? Need 2 dozen.

Semco Double hung with broken balance pivot shoe. Pivot shoe is blue. The number on the balance is q22TG the color of the balance is white and it is ribbed channel. The pivot pin on the sash is also broken and the long screw that holds it in is bent.

The window won't stay open, it slams shut. They are marvin double hung windows. the number stamped on the channel is 22HD P on the left side its stamped 22 U The window are about 25 years old.

When I took my sash out, the part from the first photo came out. I don't see how to put this back in. Now I the sash is really tight. I'm thinking that I need the entire plastic piece that the sash slides in for both sides. I can't find that online. The only marking that I see is 22HB. ... (cont.)

Hi, have a couple of old double-hung (non-tilt) windows with channel balances that need replacing. The channel balance is marked with 22HD B.S.I. Sash weighs about 16lbs. The sashes are compression types. The channel balance measures 23.25in long x 9/16 wide x 9/16 deep. The liners do not have any t ... (cont.)

Hello. I stumbled onto your site. I believe I need to replace at least 1 balance spring assembly in one of my Loewen windows. I think I make out the code as 22 HD 8 SL. There may be something like RP or FP below. Perhaps you can make it out better than I. I have not yet removed anything. So I am not ... (cont.)

The balance overall length is 23 " X 9/16 " width. The window is a Weather shield double hung 50" X 24". The spring is 8-1/4", OD 7/16", wire thickness 1/16", carbon steel, hook loops both ends in the same direction. NOTE: The spring is all I really need.

I have Bonneville double hung windows throughout my house. The company went out of business a few years ago and I can not find anyone that sells replacement parts. I presently have 8 windows that the balance has been broken. And three of those, the left and right balance has been broken. I am very h ... (cont.)

Good Afternoon, I'm looking at replacing all 4 balances on a double hung "tilting" window but I can't match the stamping to anything on your website. I removed the interior pane of the double hung and it looks like one balance reads "22 BSI" and the other just "22" Please see the attached photos ... (cont.)

Attached picture is for a Marvin #232023 window 23X26 size. I have one replacement part with a 22H on it. It measures 23" end to end just the metal part. I need three more units with the clips for the top and the black piece that runs inside the channel connected to the rope that window clip fits ... (cont.)

Parts are from a double hung window manufactured by Norco. I am looking to replace 2 shoes and 2 springs. The balance is 17 inches long and a 1/2 inch wide. The spring when installed is 7 inches long.

Help... The 24S2GLis 25" long the 22s is 23" long ... I need 5 sets going to replace all...windows are maybe 15 years old double hung wood, plastic sash... HELP... Thanks Bob

Hi, I need some new channel balances for some older Marvin double hung windows. The stamps on the existing ones have 22HDQ on them. Do you have any of this size? Thanks

length is 41 inches, total sash width is 3.5 inches, manufacturer unknown, sliding groove is approx. 7/8 inch wide. Tilt out window by forcefully pulling window top -- no latches. Any Idea? Looks almost like Anderson tracks, but theirs are smaller in width

I have Marvin double hung tilt windows and need to replace a pair of balances. The old balance has 22 xhd stamped on it and is 23" long and is 9/16" wide with a ribbed channel. Would the S751-23 be the correct replacement balance? Thank You, Grant `

It is good that you identified the balance series and measured the length, the stamp option refers to the strength of the balance. Please remove the window sash and place it on a scale. Stamp options for 23" Series 751: 22R will carry a window sash weight range of 10 through 18 pounds 22HD will ... (cont.)

I have tilt in windows, and need to replace 2 ribbed, channel set balances (they have shoe 15-014 attached). They are stamped with 22D (left side) and 22P (right side). I do not see these on this page. Do you have them in stock? I am looking at the S751-23 Thanks, Joe