Viewing all customer Discussions for:

21-155 1/4" Push Nut

The top pin cap broke. The doors are at least 20 years old. Mirrored bi-fold doors. Diameter of plastic cap is 3/4". The hole in the bottom of the cap is 1/4". The pin is 1/4" x 4" long. Hoping you can help me find what I need! Thank you

Looking for metal door parts

Hello, do you have most or all of the hardware to replace all of the part# 4-18? thanks

I have old (1960-70) Strato-fold metal clost doors. I have looked though other posting and beleive I see Two solutions; one for Square hole 5/16" shaft, and one for round hole 1/4" shaft. (It looks like I have the 1/4" round hole) From a July 12, 2023 post I see: 21-003 bottom adjustable threaded pi ... (cont.)

I am looking for the top stationary pin for my bifold doors. The pin could be a 1/4" diameter or less with a hole for a keeper/retainer for a spring.

I am trying to fix some metal bifold closet doors, but the attached pins are missing on a couple of doors I need to fix. Will your hinges replace these okay? They are very similar but slightly different. Here are the parts I see: 21-007, 21-001, 21-065, etc

Need to replace broken guides for metal bifold closet doors

I have 3 sets of floor to ceiling metal bi-fold doors and need replacement parts. Please view the images. There are no markings on the doors.

I need the doors parts too and bottom to smooth open and close

plastic guide runners are broken on top track and bottom track, do you carry?

I Need another metal post and the plactic tips. I just do not know what size will replace it. I also need 2 new spring post to click them into the top. This is for an 66 years old garage furnace closet. The doors are nolonger bifold, they where fused together so they only swing out pivot like a ... (cont.)

Do you have this? Need spring and top and botton caps

I have missing parts to Strato Fold doors and need 4 guide pins, slide bushings, springs and any retaining items to make these stay in place. Probably from 1970s. Thank you.

Hello Loren and Swisco Help Center, Could you please help me with getting the following hardware: Qty 1 Kitchen window lock for slider window Qty 4 Bedroom window lock for slider window Qty 1 Set of all hardware (excluding door handle) for Kitchen Closet for left door when looking at front of cl ... (cont.)

I need the push nut for an Andersen exterior door lock

I was considering replacing my clunky pin assembly as you recommend but the hole for the clamp is not square. Is that a problem? Also, the pivot clamp needs replacing but I don't see an exact match. Photos attached. Thanks!

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

To whom it may concern: I am interested to buy the spare parts for a Strato Folding cabinet with serial # 38260. I need the kit following: BM-1 - track block BM-2 - Bumper BM-4 - Upper pivot pin BM-5 - Spring BM-6 - retaining ring BM-7 - retainer BM-8 - retainer screw BM- 9 - Upper and lower guide p ... (cont.)

I need to restore a total of 4 doors. Need all hardware: Guide Pins, Pivot Pins, Pivot brackets etc. Door manufacturer unknown. Help.

Hello, I have 8 metal bifold doors that are needed to change with the new set of hardware in order to open/close them easily & securely. I am looking for your help for identifying all needed parts of the hardware. There is a tack of the sliding door on the top, and another track on the floor. I ... (cont.)