Viewing all customer Discussions for:

S770-23 23" Series 770 Balance

I have both of these broken on my window... how car i get replacements for them?

I am looking for these balancers. One pair is 20" and the other is 23" (measuring the white part only. If you need more info I will do my best to get it to you.

Need replacement channel balance. Need replacement shoe bar( image with stamp g254

I am looking for a few replacement balances. There is no brand identifier on the window or exiting hardware. You've been a big help the past with sliding door rollers. (They work great) I am including photos of the existing part. Please let me know if you have any questions.

Hi I'm have a double hung tilt latch window made by IWC and I'm looking for replacement balancers. Any ideas?

Greetings, My window has a metal bar on each side. I think it is called the balance; I am not sure. Can you please help me determine the correct replacement parts that I need? The metal bar attaches at the top of the window with a screw, and a rope passes through the frame and attaches to the bott ... (cont.)

Looking for replacement Sash balances

I need 6- 26-200 screw plugs and 12 feet of .060 " or 1.5 m/m cord for sash balancers.

This is held in by a single screw, and is 23" even Thank you Bob.

Looking for replacement parts subject as above.Channel length is 23". Channel width is 9/16" Channel depth is 1/2".Please note the end detail ( a tab } as shown in the photos.Looking for 2 each piece. Please provide pricing and shipping cost to CaliforniaThanks,Mohan

23 inches long 1/2 inch wide.

This balance is 23 inches from metal to metal. 9/16" wide and 5/8" deep. I've looked for them on your website, but can't seem to locate them. Do you carry this type of balance? Stamped on it are the numbers 2220.Thank you,John

All 15 aluminum windows in my house appear to be the same manufacture except for size and weight. Twelve windows are marked 27C and your S770-27 has worked in those. I have two windows that are marked 23b which I have not replaced but it appears that your S770 series will work there too. My confusio ... (cont.)

So I have been able to determine that I have a 770 Series channel balance that is 23" but can't determine the weight rating on it. Can you please assist. Nick

the balancer I need is stamped BSI 23B. The length is 23 inches. the depth is 1/2 Inch and width is 1/2 inch I included 3 pictures. One showing the stamped letters and numbers. One of the block and tackle and part that string terminates in that attaches to the channel slide thing which the wi ... (cont.)

I am looking to replace this window channel balance. It is 23 inches long and 1/2 inch square aluminum

I do not know the manufacturer of my windows and cannot find it labeled anywhere on them. I need to replace this window sash. In addition to picture above, it has a label of UB 23D. Thank you

Very similar to series 770 but the one I have has an extra rivet at the top where it hooks on to the window channel.

This is a photo that I have taken of the parts. Where can I purchase these parts to hold up my windows?This is the tag on my windows NFRC 100/200CODE MBC-304SPEC-NFRCSERIES-SEDHMST 304-M-002Can you identify the parts that hold my windows in place with the photo that I sent you. This holds the window ... (cont.)

Hello, The original tilt balance has a hook at the top. I couldn't find one that matchesin your site and I need to find a shoe cams. Balancer marking 23E Thanks, Tony