Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

I'm looking for the proper Anderson window crank opener handle in white. I need 2 of them. Thank you.

I have attached photos as I am trying to find some assistance replacing these broken cranks. The one with no handle is for a bow window with 4 small awning type windows. All are broken(sadly). The one with the winding handle keeps falling off the track and I need 2 of those. The slider/roller kee ... (cont.)

I need your help to identify what replacement operator will be suitable for the awning window. I also need a new white crank and crank cover. And if you have a lubricating spray I would like to order that as well. Thanks in advance for your help!!

Hello, I was hoping to get some help with this hardware. I actually just need the clips that would go into the track. I attached one image of some hardware that has the clips. If I could just get those clips, great. Otherwise, I would need the new hardware.

Would you have any replacements for these? This house was built in 1956. Thanks!

I have Anderson window walls, model number 55003, with number 34 stamped on the arm. Is it possible to buy the the whole assembly (arm, shoe, and crank)?

Crank out 91/2 inches

Hello, the handle in the photo is from an old Andersen window and it is stripped and will not seat into the crank operator. Do you have a replacement? At this point I am looking for any handle that can work and not concerned with obtaining an exact match.

I'm looking for these in white. What I bought from you wont work.

It clicks like it is stripped when opening

Replacing Anderson casement crank

Do folding crank handles exist for Andersen pre 1995 casement windows?

Sunrise window cranks 3/8 hole in light brown

Looking to just replace these cranks/covers and locks with new white ones. I feel like the middle cranks isn't even the right one for that window. Thanks for the help.

Good morning, sorry for the bother. I'm looking for a casement operator cover and crank for one of my Anderson Casement windows in my kitchen. The cover has the numbers 7191-33 on the underside while the crank has the numbers 18 7191 imprinted on it. I'm guessing I need some kind of assembly piece? ... (cont.)

Hello, I am looking for a replacement Window operator crank handle with a 3/8" gear bore for an Andersen casement window. Your part number 39-286 is very close but not exact. Mine has a number on it 45001 and larger dimensions than your 39-286. Please see the pics I am sending as well.Thank you for ... (cont.)

Need to replace.

Windows installed probably 20 - 30 years ago. 2 windows per section x 3 sections with about 8" separation between each 2 window section along wall of upstairs room. Of the 6 cranks, only about 3 will push window out and up. The others either grind and sound stripped or if window is out must be pu ... (cont.)

Looking for a replacement

I have a stripped crank. #60P719117. It is discontinued. Can you give me a replacement part option? I'm sending 2 photos.