Viewing all customer Discussions for:

15-181 Double Support Detent Clip

Can you help me figure out what part this is, I need to replace both the right and left Thank You

I need help identifying the part number for the lower shoe on the left and right that need to be replaced, I've included photos of the broken ones, the ones that are NOT broken, and the window style

We live in a Maronda home that has "MI" (???) windows in it. We need to replace one window sash that lost its seal (turned white inside). But much more urgently, I need to purchase a bunch of the little plastic catches that are screwed onto the upper corners of the lower sashes, which help hold onto ... (cont.)

Hello! I have a 23 year old house with a window that has a coil balance on either side. Both of the springs have broken, leaving a short section up by the support. The window is obviously now very heavy and won't stay up, and has become a safety concern because it is the bedroom window of our spe ... (cont.)

Hi, Part of the plastic in this window shoe has broken (best seen in image 4). Can you help me figure out what replacement to order? Thanks!

I need 2 replacement window coil balances for an Anderson window installed in 1987 or 1988. The sash weighs 8 pounds. The only marking I could see is CO on the round metal pieces. The round metal pieces measure 1/2 inch in width. I don't need the 2 plastic pieces with the 2 holes with 2 screws. They ... (cont.)

Hello, I do not have the parts removed. Thought I could've just went online and identified them myself to order. Hopefully you guys can help me thank you very much.

I have double hinge window made from American craftman (I guess) 35.75 in. x 53.25 in. the constant force balance is damaged. there are two coil on top, with two screws. dont see screw for the U lock part. if you can let me know what the part # to get. thank you! wendy

Dual coil balance with a 9 stamped on both coils. 2 screws mount it to the window frame, one through each coil

No manufacturer's info found.

Can you please ID track shoe and spring. Sash weight is about 20 pounds. Thanks

We know the window is a MI window double hinge

We are looking for a replacement part for the pictures attached. Please email us. Thank you

Hello! I have a lower sash that will not stay open and after online research, found that my coil balance / spring coil is broken on both sides. The top sash functions as it should. The coil says 832 on it. I included photos of the parts I pulled from one side of the window frame?. Can you guide me ... (cont.)

The coil spring balance on the right side of the vinyl tilt-in bottom window is broken. Can the coil spring be replaced? Do I have to replace the bottom pivot shoe and/or the upper spring holder? Not sure how to remove the pivot shoe - might need to remove the bottom track cover 1st? Any help is ... (cont.)

I need to replace broken springs for MI window. The window was replaced around 2008.

I have a window in my bathroom with tandem spring coils. The spring is stamped with a 4 on one spring and a 5 on another spring within the same tandem set. Do I make it a 9 pound single spring or what?Avidon

I was unable to find any information to identify the manufacturer of the windows. The coil spring is stamped 932. I am uncertain if this is the complete unit or if I will also need the part that fastens the top of the coil spring to the window channel. I hope that this will be enough for you to h ... (cont.)

Hello, I am in need of approximately 50 sash balancers for an apartment complex. The balance in the picture isn't broken, just removed for pictures. I don't see any markings on the balance. The dimensions appear to match your S140 series. Please advise.Thank you,Don

please help