Viewing all customer Discussions for:

23-070 Mirror Wardrobe Door Roller, Concave

Hi, there are not numbers or manufacture on this piece. I need to order several of them. Is this something you stock. Thank you Roseann

your help would be appreciated. Also, is it possible to just change out the wheels?

I have an older 3 doors mirror closet sliding doors from John Sterling. I need to replace the track because it was bent during a floor replacement and its old and worn. I might replace the bottom wheels also they are old and worn. I'm wondering if it would be ok to change to a different track than t ... (cont.)

The wheel has broken on one of the sliding mirror doors in my bedroom. I'm looking to replace the mechanism. The marking OOX with numbers 21-717 and 21-767 appear on the mechanism, as you can see from pictures, which is approximately 4" high at its tallest and 3" wide. The wheel itself is approximat ... (cont.)

The roller on my sliding glass wardrobe door is a Cox 21-717/21-767. I assume your 23-070 is an adequate replacement as the measurements shown seem to agree. Please advise, then I'll order on-line. Thanks

Hi there, my question is, will part # 23-070 replace the older part #21-717, 21-767? If so, do you send to Canada? Thank you for your time Patti

Looking to replace cox door hardware 21-717/767. I have reviewed your earlier posts and the 23-086 is mentioned in all, but some your mention the 23-070 and here you mention the 23-081. What's the difference between the 070 & 081. Also, the length of the bracket is 2 7/6. Would you tell me the spa ... (cont.)

Can you advise on the difference between the following two rollers you sell. 23-070 and 23-086? The one I have need to replace is a COX 21-717/21-767.

I purchased and used the 23-070 concave roller, but the plastic wheel continues to rub and is wearing-out. The size of that wheel is 5/16 thickness. The unit itself fixes well, but the wheel is too think for that track. Do you have any suggestion for new units for that Wardrobe Mirror door? The ... (cont.)

Hello, I need the top and bottom tracks for mirrored closet doors. The opening measures 80" h x 60" w. I have included pictures of the top guide and the bottom roller. The number(s) on the bottom roller are Cox 21-717 and 21-767. Thanks! Donna

Hi, I am missing the matching top guide to this closet door and I can't find a replacement for this model in any local home depots or hardware stores. Do you have this piece or know where I can find one? Thanks! Leeav

what is the difference in 23-086 and 23-070?

Hi Question one: I see several replies from Swisco for the above match which is confusing me... For cox 21-767 swisco has 23-070 and another swisco Mirror Wardrobe Door Roller, Convex Product Code: 23-081 ... so is the 23-070 replaces cox 21-767 and also the swisco 23-081 ? Question two: I also ... (cont.)

I am looking for the roller that isn't concave. I guess you could call it the male part.

I ordered 2, 23-070 roller assemblies. They are exactly what I need other than the roller itself. I need a "male" roller as opposed to a "female" or grooved roller. I can't find it anywhere on the website. Help.

We need to replace a fitting model 21-717 / / / 21-767 as it broke the wheel. There is your representative in our country? or we can send a replacement hardware?

This is for a 9ft by 4ft mirror slidding closet door thanks

I need to replace the plastic wheel on this piece of hardware. Where do I find it? I checked at Home Depot...no luck. Do you have a replacement part (wheel) that can snap into place?

Product 23-070 is thi for just the roller oar the complete unit? Also can you ship to the UK?

I can't get the old cox roller out of the sliding glass door. I have removed the two screws, but can't seem to get the old roller out. Any help would be appreciated. Ollie