Viewing all customer Discussions for:

23-130 Bi-fold Door Top Slide Guide

Need 4 replacement pieces. Part fits in the top track of bifold door frame and slides to open and close door. Pin in top of door goes in between the 2 springs. Piece is 4" long and 7/8" wide.

I don't see a name of the company, the track is approx. one inch I would like to replace the whole tracking system

I need to find the top and bottom portion of a bi folding closet door.

This part is attached to the top of the bifold door.

I have two sets of bi-fold wood doors that will not stay closed. A friend of mine who has a similar set of doors said that I need a top center spring to keep pressure on the on roller guides to keep the doors in a closed position. I ordered and received part 23-130, but I don’t understand ho ... (cont.)

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

Hi! I need the pivot pin that goes into the top of the folding door and into the sliding guide. What should I order from you?

4"long x 3/4" wide Please advise if this is something you can provide. Thank you! Jayne

This part is about 20 years old have anything similar?

Good evening, I'm looking for replacement parts for our bi-fold doors at our home. The only P/N I can find is on the L-Bracket which reads Acme 2060. I'm struggling to find an exact replacement set for two sets of doors - seems like there are newer replacement models, but not exact and would like ... (cont.)

Hello, I am looking for replacement parts to replace mirror bifold door hardware. Original parts, as shown in pictures, would be ideal, but I am open to alternatives. As you can see the top pivot is bent. I would greatly appreciate if you can help with identifying part and an advice. Thanks, Oleg ... (cont.)

I am writing this note for your help and advice on resolving problems with bifold doors in an old home that I bought. I have 8 sets of doors with these problems. I don't know who made these door but they were probably built in the mid to late1970's. The house was built in 1977. As best as I can des ... (cont.)

I've attached a couple of pictures from my bifold door. It seems to be missing something on the bottom to run in the track - hopefully you are able to give me some direction. Bottom pivot point seems to be ok it's the bottom glide pin that seems broken or is missing something to glide on the track ? ... (cont.)

When would I need a slide guide on a steel bifold door? And does it mater if it is a single or double bifold?

I have two 4 foot openings with double mirror bifold doors and one 18 inch opening with one bifold door. The tracks are rusty and warn out, from the late 70s early 80s I believe. They are heavy doors and have tracks on top and bottom. What can i get to replace them? The pin hardware on the doors s ... (cont.)

I would like to find track slider as seen in the attached photo

Just found this post on your website under https://www.swisco.com/discussions/Replacement-track-guide-77-232960 "Your photos resemble the 23-130 guide. You should be able to pinch the grooves in the center of the guide together to release it from the track. The new guide should snap into place rela ... (cont.)

Hello, I'm trying to locate a replacement spring loaded track guide for a set of fold out closet doors. The photos are of the existing good part. There is a spring loaded pin at the top of the door that goes into the sliding guide. 2The only identification found anywhere is on the door hinges, ACME ... (cont.)

I need the spring apparatus for 24 in folding fake wood door. The spring part measures 4 inches by 3/4 inch. I need 1. Do you have the part and able to send? Thank you!

The slide guide broke off when it was bumped. I want to replace it.