Viewing all customer Discussions for:

23-130 Bi-fold Door Top Slide Guide

BI-FOLD DOOR

I have about nine ACME folding doors in a home we just purchased in FL. They are all in varying states of operation and all apparently due to the missing peices of hardware. I took photos of the one that does indeed work, see attached, in the hopes that you could identify replacement parts for me. T ... (cont.)

The right photo shows the spring assembly, it seems to be broken on one side, though it is hard to tell. When the doors are closed, the rollers press against the spring but won't stay closed. I purchased your part 23-130 Top slide guide which looked like the broken part, but clearly is different. ... (cont.)

Purchased four 23-130 white long door stops picture #1 to replace the stop in picture #2 obviously I purchased the wrong part or is there another part needed to make the part is picture #1 work? Can you help?

SWISCO: I need to replace an old (approx. 13 years) top slide guide as shown in the attached photos. It measures approx. 3-11/16" x 9/16, and was installed in a modular home produced by a French Canadian company. It is similar to your Product Code 23-130. What do you suggest? And how would I ins ... (cont.)

My slider guide keeps falling out and I am at a loss at to how it should be re-installed. Thank you.

Need these two hardware to fix the old closet slide door.

I Have an ACME 17-4405 block like the picture above which Needs a spring loaded pin and also a broken glide in the bottom of the door track #17-4466. I hope you can help or point me in the right direction. Thanks Jerry

This bifold door is 40+ years old. There is one of these parts on each door, only 1 broken. Can't find anything locally. Can you help? (I sent a picture previously of only half the part. Didn't realize there was another half.)

The sliding bracket from our 40-year-old bifold doors has broken. Any idea where we could find a replacement? The end that broke off possibly had a lip on it to lock it in the track.

Looking for help with bifold hardware need the top assembly spring mechanism along with pin that goes in the door as well as the pin that goes in the bottom of the door that goes in the track. Pictures attached. Thanks

Hi, I need a new pivot block (or whatever you call the part that slides in the bottom rail) for a bifold mirrored closet door. Problem is that the corner block and rail on my door look different than the others I've seen on your website. It's an old Acme 17-4405 corner block, and the spring-load ... (cont.)

Hi! I feel like this top slide guide (23-130, referred to as "the guide" hereafter) is the part I need. The pics show this original part is an ACME 2066 (US PAT. 3536120). They are 4" long and the track is 1" wide. I actually have two, 4" long springs on my doors, as opposed to one larger (23-13 ... (cont.)

This plastic piece fits into the track of a bi-fold door and the pin of the lead door fits into it. I do not have the exact measurements but it is approximately 3 " long by 3/4 wide

This door spring came off the top of my bi-fold wooden closet door. Is it the same one that you sell? It is 4 inches long and about 5/8-3/4 inches wide. Thank you. Lynda

Hello: I need 1 part as pictured for my bifold door. This part looks like the one you have on your website. Does it look the same to you. If so I would like to order 2. I can have one for a spare. Please either email me with you result. Thank you. Harry

I am trying to replace the slide glider in my bifold door but it will not pop in

The attached photo was taken of the subject part in the top track assembly. It's about 2" long. What's it's name? Is it replaceable? Chris

Hello, I have two bifold doors that meet in the middle. One has a #23-130 spring to keep it on the upper track, but the other does not. I thought I just needed to add in another 23-130 for the other door, but when I installed it, it turns out the doors cannot close because then the two 23-130's a ... (cont.)

ours is plastic and has a spring on each end with a space for the post on the door.