Viewing all customer Discussions for:

87-180 Merzon Sliding Window Roller, 3/8" Concave Wheels

Attached are the photos of the window parts I need. These windows are probably from the early 1980's aluminum windows. Plastic car slides into the window channel and screws in with metal wheels. The plastic car is 11/16" wide x 1-7/8" long, The thickness from the bottom of the groove that catches in ... (cont.)

I need replacement rollers for the windows in my house. The picture of the roller which is removed is missing the attachment tab.The tag on the window states"MFGR TOM-014-1Scott

Is there a replacement for this Atrium window wheel?

Hello, I need four new rollers. Windows about 25 years old and slide very roughly and noisy along rail. Any other suggestions would be much appreciated. I'm using Elmer's dry silicon spray to lubricate slide; is there anything better? If they work great, I will order many more for the whole hous ... (cont.)

Need 40 of these. Two per window

plastic housing, brass wheel rollers for aluminum sliding window. Window installed early 1990's most likely California manufactured windowTom T.

I am searching for the rubber gasket that surrounds these 33.25 x 11 double glazed panes from a sliding bathroom window. Windows may be Viking although there are no identifying marks. Double glazes units are 5/8" wide. Also looking for small roller units that are part sliding portion of window. ... (cont.)

Can't find these and I need to replace them.. Help? Thanks!

I am looking for replacement rollers like the ones pictured. I cannot find any identifying numbers on the frame or the rollers. please note, there should be 2 roller wheels in each unit but one is missing in some of the pictures. I need 4 of these. Thank you for your help.

Hi there- We have a Merzon Series 700 sliding glass door which needs new rollers. Is the 87-180 the proper part? Thx

The attached photo's are from one roller that I removed from an unknown brand aluminum double pane window. The cabin was built in 1980 and the windows have no markings but appear to still be sealed properly. The smaller bathroom windows have two of the attached rollers (one roller each corner) whi ... (cont.)

Hello SWISCO Customer Support Representative and Experts, I tried to upload pictures in 'Identify Your Part", but was unable to. I need help identifying replacement brass concave 3/8" rollers for metal framed dual pane Home Depot windows purchased in 1999. Thanks Respectfully, Robe ... (cont.)

I have 2005 aluminum window master windows. I need a sash roller for my windows. It is a black plastic base with slotted double plastic wheels as you can see in the pic. Each roller is 1/4 in wide x 3/8 deep. If you don't have the part I could retro fit something if you had the right dimensions. ... (cont.)

Our AAMA window sticker shows the following: Code: MI-1 Spec: HS-B2 Series: 420 MST: 9154 The sample picture shows two rollers, most of the windows have only one under each side (meaning that this sample wasn't pulled apart when installed). The "railing" off the left side goes over a railing ... (cont.)

I have been going thought your website trying to find the roller that could fit my windows. I think your Merzon Sliding Window Roller, 3/8" Concave Wheels (Product Code: 87-180) is the one. However, I cannot see the holes for the screw to secure the housing to the window frame. I ... (cont.)

Product Code: 87-180 This sliding window roller assembly is used on Merzon brand windows. It features nylon housing with two 3/8" diameter brass concave wheels. Does package includeds 1 set per window?