Viewing all customer Discussions for:

39-318 Truth Split-Arm Operator

Good Morning; Am search for replacement crank handles for the Truth Mechanism installed in my Schuco Casement Windows in the Spring of 2006. The handles are "spinning" around the spindle; hopefully, changing the handle will solve the problem as changing the spindle does not look easy The lef ... (cont.)

Someone has tried to pry off the cover causing the gears to malfunction. is this cover removable? The only markings are on the arms, TRUTH and 21550

Wright split arm operator like 39-387/388 but screw hole pattern different and dimensions 4 1/2 x 3 1/2 rather than 4 3/4 x 3 1/8. Also, what handles go with this?

All of the windows in my kitchen have broken hardware, and as a result, I cannot open any of them. They are all casement windows with crank hardware and plastic latches. In two cases, the crank operators are broken and in one case the locking latch is broken. I have contacted a few handymen to se ... (cont.)

I am looking for a replacement operator for a Del Mar operator arm #21550. I spoke with "Jody" in customer service who sent me a Truth Dyad operator #39-316. It is the same type of operator that I need except the difference is in that the original part has a 4 inch arm that attaches to the window an ... (cont.)

I need parts for casement window Delmar hardware. #2012722 and 4980947. Parts needed are handle, crank shaft, and lock. Thank you for you help. Carol

I AM LOOKING FOR REPLACEMENT CASEMENT OPERATORS TO MATCH PICTURES. SPLIT ARM. GEAR ARM IS 4-3/8' CENTER OF RIVET TO CENTER OF GEAR. HINGE ARM IS 3-1/2" FROM CENTER OF RIVET TO CENTER OF CLIP POST HOLE. EXISTING IS "WRIGHT" WITH #7702 STAMPED ON UNDERSIDE OF HOUSING, #07900 ON HINGE ARM AND #07868 L ... (cont.)

I need to replace some parts for my window. I am unable to identify the part #. It says its a DelMar. Could you please help me look for the part # and how I can go about ordering them. The lock latch is about 3.5" The crank left and right is about 4" And the riveted holder is .75" ... (cont.)

I need a casement operator and hing. The number on the operator is 07900 please advise.

The picture is for handle lock . It is from the same window as the truth operator. Dimensions for hansle lock: From pivot center to end of tab is 2.25". Handle is 3" from tip of handle to center of pivot. Mounting holes are 2 3/8 center to center. The operator is exactly like Truth-Dyad/pd/C ... (cont.)

I need to order there parts for all my windows. I need 9 of the locks as well as 5 of the cranks.

The piece says TRUTH and 21550 on it. This does not appear to be an actual part number on Truth's website.

Hi guys, my crank assembly is broken, unfortunately I do not know the manufacturere of the frame. I just stumbled upon your website and was hoping you could take a look and see if you recognize is without taking it apart.

Thanks for posting. I'm not sure if your existing cranks will work with our 39-317 & 39-318 Split-Arm Operators. Does your original hardware match these two operators? Do they have the same dimensions? If you aren't sure, I'd have to see some pictures of your existing hardware to know for sure. ... (cont.)

I am looking for the Dyad Operator 39-172 in a shorter arm length than displayed. The printing on it states 21550 "Truth." The one if the pictures displays a 5 inch operator arm but I need a 4 inch. I need two lefts and two rights. Also, the window is 11 years old. Is this covered under a m ... (cont.)

We have Silverline casement windows. The mechanism that opens the window broke when I tried to open the window. I don't know what I need to order to replace it. I looked on your website, but it all looks like greek to me. can you help? Thank you - Frank W.

Does part #39-318 come with any gaskets, screws and any other parts needed to connect to the hinge?

I am trying to find a replacement operator. The one I have has Truth stamped on it with the number 21550. I have searched the truth window hardware site and still no luck. There is no offset and the arm at the hinge measures 4". the arm from the operator measures 3". I hope I provided good info. ... (cont.)

I need the operator exactly like 39-172 in white, except the part of the operator that is shown in the illustration that is 5 inches long is only 4 inches on my operator. Is this available. Everything is identical to my operator except that last link that connects to the window.