Viewing all customer Discussions for:

39-529 Truth Hardware Track Slider

Need right and left side. (Bent) Also handles just spin around

Please see photo attached of Truth hardware casement/awning operator. If you can please help identify part number to order from you, need both right and left hand in this finish. Thank you kindly.

Needs replacing

Not sure which one to order...

Can't find any company near me that will fix my window so I'm hoping to get the right part and repair myself. Thanks Patty

I need a replacement window crank assembly as the gears are stripped. The reason they are stripped is the casement window has saged and is rubbing on the bottom of the window frame. Watching a video showed an adjustable pin on the bottom hinge. My windows are about 20 years old and have a stationary ... (cont.)

Do you have this operator for hurd windows?

The 39-253 left and right (I need both) look like what I need. Can you confirm. Also, the original looks like the cover plate (white) is actually riveted to the mounting bracket. Since the will the Truth operator cover fit the Encore dual arm operators?

This is from our older Hurd bay window that's the left hand hardware and I need the hardware for the right hand casement. The casement sash is 24x58

is there a right and wrong to place this part in the track. Rick

We need to replace Truth operator #14D800P. There are 4 lefts and 2 rights. My question is the arm that goes into the track must be a square guide to get into the track and does the handle cover and handle come with it?It looks like I need two 39-253-LB, four 39-253-RB and six 39-529. I would also ... (cont.)

There is a # 14D500P ,or it could be 140500P.Hurd window.

Would this be? 39-341 39-352 39-232 36-048

I'm the property manager for Altia and we have a window that is missing the entire hinge/bracket/handle on their window. In the pictures below are all of the parts we need (from a similar window). All the metal hardware + the handle and cover are needed. Can you please help me identify the p ... (cont.)

I have a window that will not complete crank to close position (photo 2). Photo 1 is taken from inside room looking down on mechanism. Photo 3 is taken from outside house looking at mechanism. Gear looks warn at arm. I am wondering if this is the problem. Photo 4 is looking at the window fully ... (cont.)

My casements operator can open the windows, but they can't close the windows. Please help me to find replacement parts. Thanks.

Please let me know this or a comparable part is available. Thanks

The gear wheel on the outside (shown in photo) and probably inside the housing (can't see it) are stripped on 3 of our 14 casement windows and we would like to replace them. We haven't been able to open them for several years because we can't crank them all the way closed without going outside and ... (cont.)

Hello, Trying to find window operators & Entry Gard made by "Truth" Model 31858 Please let me know if carry you the specific model or a compatable one.Both right and left operators. Thanks

Hi,We have a casement window with a dual arm operator that has worn out. It is difficult to tell what brand the window is. It has a logo with a letter "A" and two underscores. The crank portion of the dual operator arm has a code 1491-120 B. The long arm has code S-1491-160. The short arm has code ... (cont.)