Viewing all customer Discussions for:

26-369 Flared Pivot Bar

I had both pivot bars from an upper sash fail. I am unable to provide exact dimensions because broken pieces were not recovered. I attach a photo of what I was able to recover as well as the screw hole distance from an identical intact window. Also pictured is the label/sticker from one of the windo ... (cont.)

Hello, I have 2 windows with the same piece of plastic broken at the end of the balancers. And one of them also has a piece of broken metal that is sort of a T-shape. One of the plastic pieces has the number 20 on it and the other has the number 8 and they both have the same patent number on them. ... (cont.)

See photos attached from my Kohler windows. The window has two of these on the bottom of the lower sash that permit it to fit into the balance mechanism. Both are broken off. One photo is of a good part, taken from the bottom angle of a working window. The other photo is of a broken part. The remain ... (cont.)

Broken window clips on 10 windows

This pin snapped while trying to re-install the tilt out vinyl window back into the window frame.

Farley Windows Upper sash pivot pin The total length is 2 1/4" Length from top to 1st hole is 7/8" Length to 2nd hole is 2" This piece is hard plastic. The windows were installed in 2001

1st to pics are pivot bars for top and bottom window. 3rd pic is a screw up and wondering if any way to cover. 4th pic is cover- its hard and brittle do you sell new ones that are a little flexible. Thank you

Hi I would like to replace some broken tilt latches (12 pieces) and pivot bars (12 pieces). I think the tilt latch should be 26-39, but it is discontinued as I checked on the website. So do you have an alternative that I could use? For the pivot bars, I was not able to find a good ones, but I thin ... (cont.)

I'm in search of this pivot bar. I have found ones similar but they need to be longer. 2 and 11/16 total length. I have ordered about 7 different kinds with no luck.

Would you be able to match new hardware for two windows based on the photos submitted. Please advise. Window sash weighs approximately 14 lbs. Thank you J

Looking for pivot bar in picture. Pat.number 5_069,001

Hello, I needing some pivot bars. They measure right at 3" long. There is a number of 6240 stamped on them. Attached are 3 photos. Thank you for any help you can provide!Sincerely,Ned

I need replacement pivot bars for a silver line upper window sash. I don't know the window model number but the pivot bar part number is 1054. First I tried swisco part number 26-400. Didn't fit. The screw holes didn't line up. The I tried part number 26-369. The holes lined up but the flare was too ... (cont.)

Hi this came off a Reynolds I looked at the swisco# 26-412 and the dimensions don't exactly line up.

Top section of an older upvc window. 2 parts broke off from the side of the window. I need two replacement parts

Hi,Any idea for a replacement? Sadly, i need something this narrow..do you also have the ability to match this item?

I cannot find any brand names on the windows. What should I put on what they call these? The metal rods protruding from the windows that latch onto the spring assembly, has also broken. Do you sell those as well?

Hello We are looking for this part. I have it next to your 26-412 but it's a little too short. Any idea? Thank you!

We had the silverline windows with some of the parts broken. The lable on the botton of the window shows that the silverline windows are V3 1000 series. We need the replacement parts for the tilt window latches (10 pairs), the pivot shoe (10) Pivot Bar (5), Sealing pad/strip for kitchen window (2 ... (cont.)

window top sash part