Viewing all customer Discussions for:

26-371 Snap-In Top Tilt Latch Pair

26-371 Did not fit

Can you help. Rich

-Top side measures 2-1/16"L x 11/16"w -Bottom that slides into window frame is 9/16" Thankyou so much for taking the time to review this message and photos -Eddie

See some that look ok, but they do not look exactly like the ones shown. Perhaps there is a universal replacement?

I need to purchase replacement window tilt latches. To me, these latches appear to have very similar dimensions to your product code 26-420, except that the top part of the latch is rounded instead of rectangular. I believe the window manufacturer is Comfort World which is printed on the window lock ... (cont.)

Please help me identify which window tilt latch I need and let me know if you have it. The dimensions are 3" L x 5/8" W x 3/8"H These were some numbers that were on a sticker on the bottom of the window. H01058040002 EADHBSB1 CRDHW0329302600

Window world windows

Tilt Latch & Pivot Bar Part ID. Balances are 3/8" Spiral. Vinyl Window.

I need 6 plastic slide in tilt latches measuring about 2 1/16" X 5/8" for Crystal Windows series 400/500 and 6 bottom pivots slide in also ( aluminum I think). See tilt latch photo. Can you identify and price for me.

The part I have looks an measures similar to your 26-371, but it measures approximately 1/2 inch longer. Do you have a longer one?

I need two replacement parts for the sash lock; and, two parts that go into the bottom and lock into the part that slides up and down.

Looking for replacement parts vinyl windows

Hello,I need some replacement window latches. Please quote for right and left side of windows.Thank youTy

Need help getting two pairs of window tilt latch Cost and shipments cost to zip 75211

Tilt latch replacement part

Hello! The replacement latches I need are 3 inches long (including the tab, which has broken off in the picture above) and 3/4 inches wide. Which latch is correct? Thank you!

I had ordered item # 26-371 but those did not fit. My measurements of the broken latch is 2 3/4 inch long, 3/4 inch wide and 1/2 inch deep. As you can see, it is a rectangle, not rounded. Ideas? Thanks in advance.

Both tilt latches broke on one of our Alside Model 02A0 single hung wondows. Looking at your site, they appear to be the 26-393 or 26-243. Can you tell me which one is for the Alside 02A0? Or do I need to measure them? Thanks

The plastic part that hooks along the edge of the window broke off.