Viewing all customer Discussions for:

81-153 Tandem Sliding Glass Door Roller, 1-1/2" Concave

Marking 041/1. 1/4 inch door fastener (lower hole).Your 81-153 photo looks fine except the tapped hole seems to be the upper, not the lower as it is on my unit. Goes to a 20 year old, aluminum PGT sliding door.

We are in need of Jedco inline twin wheel sets for glass sliding door. I'm not able to purchase at a box store.

I am trying to find rollers for 2 screen doors. the roleer each have 2 metal wheels. Overall length is 4.25" x 2" x 1 5/16"

I have included 2 pictures of the information on the door and 3 pictures of the roller that has gone bad. We will need 6 of them. I hope you can help. We can hardly get the door open anymore. PGT Slidind Glass Door SGD 2000/2500ThanksDonna

The roller nor the door have any kind of numeration, names or letters. I'm just trying to find it without any success.

Need this wheel

041/1

Looking for the correct sliding door rollers for a Florida Extruders International Milestone SGD Series 1000 sliding glass door. Any assistance is appreciated.

Hello I need help identifying slider Wheels (Suggested 81-155) They are close... The wheels are 1.5 inch in diameter. From top to bottom of the metal rectangle is 1 and 7/16

All I know is the house was built in 1995.

Dear Sir: (1) I am looking for sliding glass door rollers. I contacted you a few months ago, and have finally gotten around to getting photos and measurements of the roller assemblies I need. See attached 7 photos that should contain all the info you need to determine what I need. Note that these r ... (cont.)

The top roller in this photo has two wheels that have a black core with a steel edge. Can you recommend a good replacement roller from this photo?

I have a patio slider made by Florida Extruders International (now out of business)that has a moving panel that is 4'x8'. The door weighs a good 200 lbs. The door was installed sometime around 2005. I've found a couple of other posts on the website that reference FEI sliders, but the rollers for ... (cont.)

is there another material for these besides metal?

Please see attached. I cannot locate replacements. They appear to be 1904/4904 but have nylon wheels. The nylon wheels are press installed. Any help would be much appreciated. Thanks.

Twin. roller door glides 1- 1/2 wheels Body length 3 - 1/8 Body height 1-9/16 inch Width 3/4" Maybe just -1/32

Trying to find replacement rollers for our triple 8' sliding doors. White framed doors says ESP of FLA on the jam. I ordered the Handles a while back from you (82-089) and they were a perfect match. Now we need the rollers.

I'm looking for the right sliding glass door roller. The roller I have is 3 1/8" wide for the housing and around 4 1/8 to 4 1/2" wide with the roller. The thickness is 3/4" and the wheel is 1 1/2" across. The adjustment screw is on the top. The only one I could find on your site is Product Code: 81 ... (cont.)

The label is the only identifiable anything. Want to know which rollers to purchase first without having to remove the doors to remove and match rollers. Doors are a 48" wide and 79" tall. All 3 panels open and should slide. Please advise.

Need to replace the rollers on a milestone sgd series 2000.