Viewing all customer Discussions for:

87-190 Double Roller Assembly, 1/2" Nylon Flat

Height is .5 in. The width at the bottom of image 1848 is my concern. I suspect Product Code: 87-036 is what I need, but your product description does not specify that specific measurement. Thank you for your assistance. No markings on housing.

These rollers were broken--broken rim of plastic around outside and what looks like broken clips on the ends. No identifying marks on the windows. The opening for the roller assembly is 1.375" X 0.450". Rollers are 0.530" in diameter. The windows are large and heavy. I would actually like to fi ... (cont.)

Looking to replace the rollers in window sash. Mfg is unknown.

Hello:I am having difficulty sending the image of my Alcoa windows. I need replacement rollers. They are a nonmetallic, pop-out type, measuring 9/16' in height/diameter. The surface width is 7/32" and overall width is 7/16" Below is a better picture of the nylon rollers I need. The bearing shaf ... (cont.)

Simonton Demension 2 parts I need 8 rollers and 2 retainers Retainer 2 5/8l x 5/8w Part #5.139.291 Roller 1 5/8l x 1/2w 1/2d ( includes wheel)

I am not sure if you have my part. The double roller assembly looks very similar to your part number 87-190 except my roller assembly is oval and not square.The overall measurements are: 1 21/32" length at the base, the width across the top is 1/2", the length across the top of the roller is 1 24/32 ... (cont.)

Hi, Looking for replacement roller assembly on Sears brand vinyl replacement windows. Attached pictures show the dimensions. Thank you for any help you can provide. Gina

I need to replace 6 rollers. They are 1.5 inches wide. Do you have these in stock?

Searching for 900-115644Would you have a smaller version of your product code 87-143. All the dimensions are same except the 1 3/4". The one I have is 1 3/8". Attached is the picture of a Traco sliding window roller.Greg

We need to replace the pivot shoe from several simonton windows purchased around 2006 that came installed on a modular house. We ordered the Certainteed Pivot shoe #15-192 thinking it would fit but it does not and will need to be returned. I have added a photo. There are no numbers or identificat ... (cont.)

Hello,I need 10 of these rollers please.Kurt

Hi. The attached pictures show a single plastic roller (photos 2,3 and 4) and casing (photo 1) from the bottom of a 20 year old Viking window that doesn't show a model number. The extracted roller is very well worn. Help with a model number of the roller would be much appreciated. Thank you. Mal ... (cont.)

I have two lower window roller no numbers on them can you help me find them

I can't seem to find the right size. The ones shown in the package are similar, but I doubt they will hold up. Mine are nearly twice as wide as the ones in the package. Thank you, Anthony

Good Afternoon, I have included two pictures of the window rollers that we need. We need to purchase 12 of them. Please let me know if you have these in stock and if so when you can ship them to me. Thank you, Jill

The rollers I have in my windows looks "exactly" like our # 87-036 The only difference is my flange width is 9/16" instead of 1/2".It looks like it will fit it's just the flange is not as wide. The opening that the plastic housing in going into on the window frame is "id" 1 3/8 x 7/16. The roller ... (cont.)

Based on the measurements part 87-189 is a perfect fit for my application, with one exception. The only difference is that the flat area along the bottom of the roller assembly has an extension with a hole for some type of fastener. My roller snaps in and does not require any mounting screws. ... (cont.)

Need sliding window roller. See attached pictures

This is made of all plastic with a small pin for the wheels to run on. It is a very poorly designed piece. If at all possible, something similar but better built would be helpful. If not, I can try what you might find. Depending on price, I need roughly 15-20 pieces. I can send a photo of the actual ... (cont.)

I need to find this piece for my sliding windows.