Viewing all customer Discussions for:

S385-22 22" Series 385 Channel Balance

21 9 BX CMC 11 Pulley broke and I don't have a picture of the hook.

The silver part is 22 inches long.

Need to replace both sash balances left & right. Rail is 22", overall length 23", width is 9/16. Stamped on metal 21 3 AL Caldwell

How can I order channel. It is 22 inches

Hello I'm looking to replace 4 of this Channel Balance.

Hi, I'm looking for a replacement piece for this black plastic piece that screws into the top of the channel of our window. It seems to be the piece that keeps the channel balance from going beyond the top of the window. Thank you! Vickie

I have attempted to attach photographs of the spring unit which I have removed from the window. These windows were installed in our home in 1988. I had previously purchased some replacement springs directly from the manufacture, but they no longer stock them. They advise that I could go online and l ... (cont.)

One of the two balances on a single hung Jeld-Wen vinyl window snapped. *Is it possible to restring it with a weight bearing twine? The length is 22" The width is 9/16" (~1/2 inch) The number is 2140 for 15lbs+ Attached photos of the end caps and metal hook. Please help me identify your replacemen ... (cont.)

Please advise that the 22" Series 385 Channel Balance is a match based on the attached photos. Metal = 22 inches long Winged Top and Shoe 8-12 lb sash

Swisco I'm replacing the 22" Window Channel Balances with Stamp 2120 and WINGED Top and Bottom Sash Guides on my window.Please advise as to which part to purchase.Thank you,Hans

Hello, I'm looking for two of these. It is 22 in. Long by 1/2 in wide. The sash weighs 12 lbs. There is a number stamped on it [ 2140]. I hope you can help. Please let me know if more info is needed.Cheers,Jeff

Good afternoon. I hurricane windows are about 11 years old. I notice this window was giving trouble opening and closing. I checked the window balance and it looks to be damaged. Can you please provide me with the correct replacement part.regards,Miguel

Hello can you please help me identify my channel balance stamped is 2130 BSi LI and the metal is 22 inches long. The top and bottom ends are riveted.

22 inches long, stamped 140L at bottom

1/2" width 22" length (metal edge to edge) On one side is a printed "ID No" >> 21 4 FX CMC 7 I would like to order a replacement part.

there are no numbers or markings on either of the pieces. The longer one is 28" including plastic end pieces. Metal only is 27". The shorter one is 22" including plastic end pieces. Metal only is 21" Nee 6 of the longer ones and 2 of the shorter ones.

Channel length is 22" Stamp is 21 5 GR Caldwell We will be needing 6-10 balances

balance needed

20 2 HR CALDWELL 22 INCHES LONG

Can you please identify this part? We need two 16" and two 22". They came off a Window Master aluminum single hung non tilting window. Thank you,Eric