Viewing all customer Discussions for:

S385-22 22" Series 385 Channel Balance

Need help finding the right part

Hello,Can you please help me identify what part I should order from Swisco?The channel is 1/2" wide and 22" long. Thank you in advance.Travis

Hi, I try to order some channel balances through your web site but I don't know which one is good for my windows. Please let me know your recommended channel balance ASAP. Thank you. Jason actual channel length I measured: ~22" weight of whole channel balance: ~6.2oz for non tilt window ... (cont.)

Hello!I am hoping to replace the block and tackle hardware for a sash window that looks like it hasn't worked right in a long time. One of the block and tackle balances is missing in fact. and the mounts in the window frame look painted over.The one balance I do have measures 22 inches for the cha ... (cont.)

It appears that my balance is a series 385. The metal part is 22" long and i believe both ends had wings but it looks like the wings are broken off on one end. The makings are confusing to me. If you look at the photo at first glance the number appears to be 29 30 but this is not correct. A 29 30 ... (cont.)

I need 10-1530 & 24-2130 balances

the numbers stamped on the balancer are: 1. 21 4 2. bsl 08

Channel length is 22" long. The stamp on the side of spring ( 2190T 28 )

BEST BUILT WINDOW 23" LONG OTHER MARKINGS 21 2 8SI ML

Hi, looking for two of these. Length is 22", weight of sash is 37lbs. The white end appears to have had side tabs that have broken off. Thanks for your help- Jano

I bought a home that has a window without any channel balances in place, which makes it hard to find a replacement! Of course, it's the only window of its kind of the house, too. It's a 24" Alpine single-hung window, and the sash weighs about 16 pounds. There is a serial number-looking code on it th ... (cont.)

We have 22 WindowMaster windows that we need to replace balancers in them. We bought this house a few years ago and many of the windows cannot even open anymore.Pictures above are what the top and bottom pieces look like.CAN YOU HELP us identify which parts to order? We weighed and measured every ... (cont.)

Part BSL 2010 metal part measure 22 inches. I need 2 of those. Part BSL 2410 metal part measure 25 inches. I need 2 of those. I also see you have some thing to put on the worn track of sliding window , it measure 2 windows measure 58 inches and one window measure 53 inches wide , do I need rollers ... (cont.)

this measures 22" and you can see the plastic end is 1". I also need clips for the window frame as they are missing. Thank you

Hi, I need help in getting the correct balancers for two windows. The five photos are only for the first window, which has 21 -3, measure 22inch metal to metal, and the plastic Base measured 1-1/16". I have a larger non-tilt window that completely missing all the balancers. The window has the same ... (cont.)

Channel length; 22"Channel width (at bottom) 5/8" (at top) 1/2"Any markings were barely visible;"Caldwell" and either "21-4" or "21-A". The stamping was a very light ink and almost completely faded.Thank you for your help and reply if more info is needed.Craig

Hello, I'm looking to replace 3 pairs of channel balances on my aluminum windows. I attached 3 images. They are 22" long and 1/2" wide. The number on the Channel balance is 2140, and is located in the attached images as well. Could you please help me identify which parts these would correlate with ... (cont.)

I have an old Pennco single hung aluminum window. The channel balance is stamped 21B. Which stamp option (weight range) should I order?

Slide is 0.5" width (9/16") and metal is 22" long. Markings on Pacific Window slide are: 21 3 CX CMC 7 (see photos)Would want to replace both slides as recommended so want to order two correct slides. Left slide string broke, expect similar wear on right side slide strng. If additional pict ... (cont.)

I have a customer with a number of disabled Milgard windows. I removed one sample and the spring loop at one end had failed. The body of the sash balance is 22", however the stamp on the side is "20 C", which I don't see listed anywhere. What would be the equivalent current stamp replacement? Th ... (cont.)