Discussions for S385-29 : SWISCO.com

Replacement single hung balance spring 2830

Hi there, and happy new year! I'm in need of replacing 4 of these 2830 , 29" long balance springs from a single hung window(s). They're from 1987. My closest estimation is your Product Code: S385-29. Thank you, Kevin

+2

Counter balance

I need 6 replacements stamped 28C USB. If this works out I will order more.

+10

Replacement channel balance

Hello, Can you please help me replace my window channel? I have attached pictures if the serial numbers. The metal portion of the rod is 29 inches long. I will need about 10 of them plus the rollers and the pulley cord assembly. I don't know what kind of windows I have but I would be grateful for an ... (cont.)

+2

Window balance replacement

One of my rental has a not functioning window and the balance needs to be changed

+4

window balance identification

I need to replace 4 balances. The windows they live in are identical, but the balances in the frames have different markings. Otherwise they seem to be identical. One set of balances has the markings "28 4 EK Caldwell". The other set says " 28 4 EP Caldwell" Both sets are 29" long. The metal hook i ... (cont.)

+2

Channel balance parts 28-3 stamp

need 2 window balances with 28-3 stamp

+7

Window sash stamped 28 4 BSI

Please let me know the correct product to purchase. Thank you

+2

Need 2 Window sash replacements mark 28C winged

Require 2 broken window balances. Only marking is 28C. Metal portion of the balance is 29 inches long. Winged plastic tips.

+2

Window Balance

28-4 BA CMC and either 11-1 or 1-1 (I can not make out the final section). Width is a half an inch. I have trying to find out what channel balance to replace my existing ones with.

+7

28 9 AX CMC 4

The bottom looks like a S385 shoe because its 1 3/32". I need a 28 9 AX CMC 4 and 23 9 HX CMC 11.

+2

Non tilt block and tackle windows balancers with wing - looking for 2 x replacement parts (for each side)

There are no names, numbers or markings on existing balancer. Metal to metal length is 29 inches. Photo of the window attached so you can see where the balancer goes. It's a single hung window with W X H dimensions of 35.5" x 32" for each sash (or 35.5" x 64" for the entire window) Can you please h ... (cont.)

+4

replace balances

Looking for new balances for 2 windows 29 7/8 H x 33 1/3 W. weighs 24 lbs. window is about 20 years old - looking for small square pieces screwed to side of windows as well -thanks

+2

Window balance

Hello There I would like to buy 1 window balance as shown from the picture Please let me know how to order this window balance, thanks Tony

+1

Block & Tackle Window Balance

I need two window baqlances measurinf 1/2" wide and 29 inches from the ends of the metal strip. It lools like one of the balances in your S300 series. The part number stamped on the metal strip looks like 28B and I have included a photo of it. Please see all the photos.

+2

non tilt channel balancer 29" long

I hope these pictures can help identify what part I need.

+2

14 28 inch channel balancers

I've attached pictures of my balancer. I measured my original balance and it was 29 inches metal to metal. I see that the number "28c" has no bearing on the final balance. I need 10 replacements for 28c and two for 28f (second is a bigger window).

+2

2820 3230

we need 2 different balancers 1. code 3230, 33" - 40 pcs 2. code 2820, 29" - 120 pcs not sure about what type of shoe and top attached

+1

Window balance spring ID assistance needed

Hello, I am trying to identify a window balance spring so I can replace. Can you please assist me. Metal portion of this spring is 29". Depth and Width are both 1/2". The spring supports a non tilting window sash that is 48 inches wide and 30 inches tall(very heavy). Stamping on this window balan ... (cont.)