Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

The channels are stamped with the #2830. the metal housing is 29" long and 1/2" wide the balance shoe is 1" wide also need 4 top sash guides (1" wide)

I need the plastic upper sash guides and to different size balancers for two different size windows. One size Balancer has the numbers 28G stamped on them and the balancer metal channel piece is 29 inches. I also need a similar balancer that is 23 Inches Long and has the number 22E stamped on ... (cont.)

Hi, It is a 1/2" channel and measures 29" for the metal part. Please see attached photos. Thank you

Metal rail is 29" long (not including the nylon ends) Stamped with number: 28F

After texting with Steve, Itook better photos and measured the balances, they are 29 long and the window weighs 40 poundsHopefully this will be enough to identify them andi allow me to place an order.Thank YouMike

Chanel metal is 29 inches long Chanel is 5/8 by 9/16 Guide on bottom is about 1 inch in depth

The spring came off and I need a replacement. The B&T has 28 12 AE printed on the end.

Not sure about the number on the Balance,(needx4) it's a little worn away? Channel is 1/2" wide and 1/2" high as opposed to the regular 5/8" variety. I am maybe thinking that the springs are maybe a little on the high side owing to the cracked and bent top window shoes on two of the windows? I'm als ... (cont.)

Hi, Could you please confirm the part number? this appears to be a 28" series 395 channel balance, but it measures 28.5". Stamp indicates 27 1/2" 3 Caldwell DM. Can you please confirm length and appropriate option?

good morning Could you please help me to identify my window balance , I would like to buy about 10 of this to replace my windows . Thanks you very much and I wish you have a good day ahead Tuan

Please assist me in selecting the correct part. I need both left and right Chanel

29 inch long channel 9/16inch wide Stamped 28G Non-tilt window Sash weigh 39lbs

What part number should we order to replace these in our windows? Thank you for your help.

29"

I have a total of 14 windows that have rusted channel balances. I have included photos for one of the windows, but am including the other part numbers listed on the channel balance, their length and quantities needed. All windows are NUAIR and seem to be the same model family, just different sizes ... (cont.)

I have a few channel balances that have pulleys broken. I don't see pulley replacements on your site. If not, I'd need to replace the entire balances. Also the top guides are broken. I believe they are '5/8" Top Sash Guide, Kinco' in your site. I.e., dimensions seem about right. Can you assist? ... (cont.)

Need 2

I need window balance channle. the stamp says 28C and 28D. On your website can't find the same stamp. Could you please tell me which one is compatible with 28C and 28D.

Good day! I could use four balancer parts. I look forward to your reply. the metal part of this is 29 inches.Bob

Metal component is 29" long. Stamped identifier is 28F