Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

Thanks for checking this out. Maybe you can help us. Look forward to hearing from you.

Need to replace both balance channels in my single pane window sash. They are stamped with a 28D and no other markings. I'm needing help determining the actual replacement for it as the single number/letter is apparently no longer used.

The original channel balances were stamped BSI-2820. We ordered a pair and they fit, but they could not hold up the sash. Sash=37 lbs. Channel length=29 in. We bought 2 different sets from 2 different places and both sets were to weak to hold up the window. Can you help? Thanks!

As you can see the pulley and spring have fallen off! the channel width in 1/2" . I need a new channel complete with ends! SOS! I appreciate your help! Thanks Janis Richter (doing this for my husband Peter)

1/2" x 29" balance. I don't know which balance to order. No markings on the window as to manufacturer. No wheel on bottom plastic part and it looks as if a tab has broken off one side. Ty

I need a replacement balance for my dual pane, non tilt sash window. I need 1 but would consider replacing 6 if the price is not to bad.

Hello,I am wondering if you could please tell me the correct size of this window balance so I can order and replace. I had a few windows not staying open a few years ago and on the receipt it had 2820 wing ends? However, the only code I can find on the balance I just removed was 28C. I have attached ... (cont.)

This window spring is from a Milestone Single Hung Series 1000. Only marking I found on spring is 28C. It measures 29 inches in length. If you need more photos let me know, thanks

Hi I'm trying to identify what size balancer to order. 1/2 in width Lenghth (top to end of medal piece) 29 in Writing on the side 28 3 KW CMC 7 pics included

I'm going to replace the balancers on three windows also with the weatherstrip like a felt I also need the parts for the upper and lower part of the window frame. They look like guides please contact me when you get a chance. Thank you.

Balance is 1/2 in width (9/16th) and 29" long. It's marked on one side with 28B USB They are non tilt windows. I'm not sure the exact weight of the window.

Hi I am looking to replace my window balancer and was wondering which balancer would match what I currently have. The balancer length is 29" and has a code of 28C on it. Any help is appreciated. Thanks!

I need 4 window channel balances. The metal part measures 29". The stamp on the front says 28D and the window weighs approx 25 LBS. Let me know if you have any questions. Thanks

The channels are stamped with the #2830. the metal housing is 29" long and 1/2" wide the balance shoe is 1" wide also need 4 top sash guides (1" wide)

I need the plastic upper sash guides and to different size balancers for two different size windows. One size Balancer has the numbers 28G stamped on them and the balancer metal channel piece is 29 inches. I also need a similar balancer that is 23 Inches Long and has the number 22E stamped on ... (cont.)

Hi, It is a 1/2" channel and measures 29" for the metal part. Please see attached photos. Thank you

Metal rail is 29" long (not including the nylon ends) Stamped with number: 28F

After texting with Steve, Itook better photos and measured the balances, they are 29 long and the window weighs 40 poundsHopefully this will be enough to identify them andi allow me to place an order.Thank YouMike

Chanel metal is 29 inches long Chanel is 5/8 by 9/16 Guide on bottom is about 1 inch in depth

The spring came off and I need a replacement. The B&T has 28 12 AE printed on the end.