Viewing all customer Discussions for:

39-365 9-1/2" Single Arm Operator, SS Roller

Was wondering if you have this part available

Operator looks correct. Wheel to fat Original wheel thinner. No nylon

Andersen casement window crank. Part # is 2430 LH and possibly the RH. depending on $. The glass is like 16 x36.5. Approximately. This window is above the kitchen sink. Thanks

Need a replacement for this 1958 left hand Anderson casement operator. My phone no is 701-721-8844 Thank you.

I am looking for replacement hardware--cranks and arms--for Andersen windows from the 1960s. This picture is not the original crank but one we were able to find about 10 years ago that works well with a bit of a gap on the sill.

Please help determine correct replacement. Arm is 9.5 inches. Thank you

Anderson 103

I have casement windows that have broken cranks and one window with a broken opening mechanism. Here are the pictures of the mechanisms on the windows. I am hoping you can help lead me to a replacement. Measured from inside, the longer arm is approximately 5 inches and the shorter arm is about 2. ... (cont.)

replacement operator needed for Right side of pair of windows, Arm has stamp showing ANDERSEN 51 7073A L, I Believe these are original to our 1960's vintage house. Am considering updating the windows, this may be the reason to do so now, rather than later...

Pl let me know if item is available. Thanks

I need to replace several cranks for some Anderson casement windows. Which replacement crank do I need to order? Is it the Stone 39-286 model? The home was built in 1971 and these are the original windows.

Good Morning, Hope you will able to find a match to replace our old window operator. Thank you Benny

Housing is broken and threads stripped

I need to replace this crank as it seems to be stripped out and won't close the window. Thanks, Ron

My research has led me to 39-027E, and it's opposite, with new window channel things...as the closest I can get... I'll need 5 total, 4 right (I believe) and 1 left, with handles, and the channels for the window. Before I order, am I on the right track?

They're 3 holes and the track is parallel to the mounting.

part no. 7073b rours is stipped do you have a re-placement

I am in need of 3 left and 3 right of the cranks shown. The housing is 2-1/2" from front to back (I had a photo, but your system limited me to 5 uploads). Can you help me? Thanks.Russ

Window crank arm fell out and stopped working. Would like to purchase new system. Measured arm and it is 11 1/2 in. Long. Couldn't find the right one myself on the sight so I'm asking for help.

I have a home full of 1960s' Andersen casements....I need new roto-gear operators... existing hdwr. has a number #7073A...base is 3 3/4" wide, screwholes are 31/8" wide arm lever is 7 1/2"......can you help? thank you, John