Viewing all customer Discussions for:

39-365 9-1/2" Single Arm Operator, SS Roller

House built in 2002, Ontario Canada. Visible numbers 30114, 30117, 30118.

I am looking for the attached picture of the andersen window arm operator. the windows were installed around 1979. Thank you

Hello. I need two of these cranks. A right and a left. And 5 crank handles. Unless the new cranks come with handles. I'll need three.

The photo is for a smaller casement window. I am also in need for two to three for larger casement windows with a similar operator. This one is by Andersen and has the marking 2420 RH.

I was looking for some assistance in finding replacement parts for my bay window casement windows. I'm not sure exactly what I am looking for. I am mainly looking to replace the crank housing and the locking mechanisms to a white version. The cranks is 9.5". The locks are 2.5" depth and 3" tall. Id ... (cont.)

1957 Ohio house no identifiers noted; Prefer folding handle if possible; 6 windows, 3 right and 3 left; straight bar Thank you!

The handle has broken off completely or partially on 3/4 bedroom windows. The part says roto on it

Trying to locate replacement

I need two operators a left and a right. Would also like two crank arms. Do gaskets come with the operators?

Although pictured is a LH crank I do primarily need the RH crank although I may replace both.

Roto, only marking is the letter B.

I have several Andersen 7073A/B wooden casement windows that were installed around 1966. The arm operator measurements match parts 39-365/39-366, but I was hoping there might be a way to install a cover over the operator base and replace the crank instead of replacing the entire arm operator. The si ... (cont.)

Hello, The pics are from an Andersen all wood casement. I need one replacement arm opener set. At the end of the arm is a steel circle that runs inside a 14" track attached to the bottom of window. Arm is approx 8-1/2" and does not fold. I also need 7 operating cranks for the same opener in bron ... (cont.)

Single arm 7073b stamp

Operator doesnt work anymore.

30818 , older window sliding arm seems to be about 8 1/2 in

?

Truth (now AmesburyTruth) sill-mount casement window operator,

I purchased an Ellipse style operator arm (#39-0273).as a replacement for a Truth (#45251).Everything matches up except the roller at the end of the arm. The replacement roller is thicker and plastic, where as the older arm uses a thin steel roller.Did I order the wrong part, or do I need to to ord ... (cont.)

I have old Andersen casement windows. There are two, one on each side of a picture window. The one on the left when looking from inside the house has a stripped handle spindle. The attached pictures are of the mechanism on the right when looking out from inside the house.