Viewing all customer Discussions for:

39-365 9-1/2" Single Arm Operator, SS Roller

Needing whole operating assembly kit. Handle, crank, arms, fasteners, sliders and mounting screws

Does Swisco have a casement window operator that can replace the Anderson 7074B?

I am looking for replacement cranks. My house was built in the mid 50s. They are stripped and won't close all the way.

cant seem to find the identical part. the windows have no markings as to brand name. crank mechanisim has no visible markings as well. looking to replace with OEM if possible. I am assuming the windows to be about 20 years old.

Can you please help and identifying this part please! Thank you!

The (3) images show my original Anderson operator, and specifically the arm offset (dropping-down by about 3 mm). I bought from Swisco your part # 39-027E which would be adequate, except it does not have the arm offset of my original Andersen model. Swisco operator part # 39365 would likely also ... (cont.)

Hello - Our home was built in 1970. We believe that the kitchen casement window is original. It is a double casement 52" Wide X 42" High. The windows do not crank open unless we push on the glass while opening. We are looking to replace the hardware on both sides. We would like the inside levers to ... (cont.)

Greetings from E. Tennessee!We need to replace numerous Window Crank/Gear Assy.'s for our Anderson Casement windows and I would appreciate any assistance in selecting suitable replacements.I have attached numerous photos for examination.Anderson Crank/Gear Assy. # 7073B Left & RightLength of Arm ... (cont.)

When cranking open the windows the part that moves the window open and close while cranking,falls out of the slotted track on the bottom of the widows. And the crank is slow to respond-nearly two full turns before window begins to move. Do you have replacement parts? The part numbers are on top of t ... (cont.)

I'm in need of the attached part.

I need a right and left for craft line casement windoed 2 numbers are seen 7073b. L. 30350 is on a piece too

Need some cranks for house built in 1970. Replacement ones I've gotten so far are either too narrow to fit on the sleeve or do t go all the way flush to the base. Part number 60-c-7041-62 with small 6 below. Many just need the knob but have heard can't get knobs alone. Thanks

The window to the left of this one is .missing the complete lever,, need to be replaced

Hi, I'm looking for a replacement Crank arm as well as an operator. I believe the crank arm (based on other posts) is your part number 39-286. The only identifiable part number on it is 60-C-7041-62. As for the operator, I only see the number 81 on it along with Andersen and R with an arrow. Pl ... (cont.)

replacement crank gear box 091620040423 truth windows

These casement cranks + operator look between a brass and stone color. They are original to the house built in 1970. Some are stripped, and we must replace them quickly before house closes on September 4th. Would like done before inspector looks over home. They have a logo which I'm guessing is SM C ... (cont.)

Hi,I need help with replacing the hardware on these older windows I believe from the 80's.There are 8 total but I am sending pictures of these 4. I drew the dimensions on the pictures.I can customize as much as you recomend so don't worry if yhere needs to be modifications to the wood. ... (cont.)

The mecanisme of the operator is broken. I need to replace it.

I have a 1992 Viceroy home that has several casement window hardware issues. I want to ensure i get the right hardware to replace them . Viceroy has no Website , so I am hoping you can help me. See photos above ThanksJohn

Need to find similar or same parts