Viewing all customer Discussions for:

39-536 Truth Hardware Pivot Slide Assembly

For a Pella window. Part has 41013 staled on one arm.

This window was installed about 18 years ago. Is it possible to get a replacement for the crank system? Thanks for your help. Jim

Do you guys have a direct part replacement for this window operator?

The parts (39-239B, 39-536, 39-558) were perfect and they work great. The window is functional again, thank you! Since the handle and cover on the broken unit were still intact, I didn't order the replacement part. However we can't figure out how to remove the cover from the unit. Is there a tric ... (cont.)

Hello! Looking to replace these operators. Sorry no installed photo, already took them out. Hopefully a photo of the opening is sufficient.

I need to replace this broken Milgard window crank right handed

Hi! Just moved in to a new house and the attic window operator isn't connected to the window. It appears as if it's missing an adapter to connect the operating mechanism to the window. What am I missing and what do I need to repair this?

My dog busted through the open window and bent the metal awning operator. The plastic clips also got busted The casing that holds the crank, shown in pygem4.jpg measures 5 inches. I'm looking for the replacement parts.

I am looking to replace this part. It fell off and disappeared on one side. Marked at top with "3" and bottom with "31878"

window size is 25 X 25 Can you let me know if you carry this I believe its right

Help - I cant ID this small plastic part. I think it is from a Truth window with a crank opening device. Some part numbers close by are 11647. 31879 Also, I attached a part that is similar 39-536.jpg, but not exact. Thanks.

It seems the gear on the crank for the awning operator is popping. Was hoping you could help me locate the part. I only have photos of the end but of the arms.

The crank operator for my awning style window no longer works. The locks on the side say Bonneville, and the operator arm says TRUTH (I think).

Would you happen to have this available? Need it ASAP. Thanks! Peter

1/2 by 1 1/2. Plastic. Where can I get this?

The plastic slider that goes into the window track broke. I included a picture of the sticker for the window hardware.

I just bought 20 pivot slides. Can you tell me by looking at my photos if the detach clip and pivot shoe are installed correctly. I noticed some of the detach clips installed have the base on the top of the scissor arms. Also some of the detach clips are installed different directions ( some are con ... (cont.)

Hello Swisco. Not sure how to describe these small parts (1.5"). These are bottom parts that broke. When cranking to open you can see the arm is disjointed/separated, thus the window cannot be opened and closed. Small bathroom window that cranks open an approx 13"x14" window. Do you have replacem ... (cont.)

Just wondering if you recognize this slightly curvy brand of operator. Thanks, Scott

Items have numbers on them 31878 and 31879. They are a clip assembly that connects the opening hinge assembly to the base of the opening section of the window. The window is a Millgard Awning style vinyl window purchased in 2007 or 2008.