Viewing all customer Discussions for:

81-156 Patio Roller Assembly, Tandem 1-1/4" Steel BB

Around 20yrs old. No marking visible

Help!

Hi i'm looking to replace both set of wheels for SGD Dash R 35 sliding glass door. I've attached pictures to confirm the correct item. Thank you Tracey

Need this part x2

Hello, I've attached photos of both parts I'd like to replace. Do you sell these? Thanks!

I am looking for replacement Patriot Patio Door Slider rollers but was not sure of this ones to use.

Sliding door wheels. Two pairs. Attached is one of the pairs I removed. The bearings are wasted.

Hello, im looking for tandem duel in the door rollers. I pulled the old part out (first photo attached). Theres some aluminum fins attached to the top that are .5 inches long. I was able to remove the fins by carefully bending them out to put them on a new roller housing, so its not that important t ... (cont.)

I need new slide rollars

Hello. We had a sliding door installed roughly 10 years ago. There is a tag on the sliding door that says Silverline Product ID 5800. I took the sliding door out and 2 of the wheels are frozen (one in each assembly). Are you able to identify what I need based on the photos? Thank you ... (cont.)

What replacement roller do you recommend for my ~25 year old sliding pation door? There are two sets of these rollers on my door.

Need 2 replacement rollers for a SGD-R50 - 71X80.Opening in door is 4 3/4" by 3/4"JimThank You

I need 2

Hello I did manage to remove the sliding rollers they are attached by two screws at each end. And one adjustment screw goes into the side. Attached are photos but I did not take any of the rollers attached to the door. I could not remove the wheel as it is in a steel case. Each wheel can pop in or o ... (cont.)

SD-R35-1810x2019 (71x80) P.L. #: 063-039

This sliding glass door doesn't seem to have any mfg name. The rollers are 2 wheels per assembly. 4 assemblies per door.

All steel construction. Wheel diameter: 1 1/4" Width: 5/8" Height: 1 1/2" Length: 4 1/2" Screw to frame distance: 5 3/4"

Thx!

I cannot locate an exact match that will fit the existing patio doors in the home. I just bought. Could you possibly help?

2- 1 1/4 inch diameter steel rollers per housing. 11/16 inch wide 1 1/2 inch deep