Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

Please help I'm trying to find the correct mechanism for my sliding glass door I've also posted photos of the door handles as well to see if that may help. I've already bought: (1) 82-239 : Multi-Point Mortise Lock and Keeper, 9-7/8" It didn't work I also bought (1) 82-265 : Multi-Point Mortis ... (cont.)

Hello, do you have a recommendation on a keeper for this door? The lock works fine but it's missing a mate. The size of the lock measured just shy of 11 and 3/4 inches, so 82-249 seems like a likely match. Thanks for the advice.

Lowes installed a door in July and forgot a lock. Do you know what the internal for this door is, so I can have a lock?

This patio door was installed and the latch and the lock to lock the door is missing. Do you have replacement parts

There are no identifying numbers, locking mechanism does not hold and I don't have a key for this lock so a new one would be great.

There are no identifying names or model numbers. The latch/ door is about 10years old and locks/ unlocks at its own will. I need to identify the replacement parts. Thanks for your help. Michelle

I ordered item 82-265 to replace a broken latch, but the strike originally in the door doesn't allow lock to engage. Could you point me to the strike that works with latch 82-265?

I need to find out what keeper will work on the door.

Good afternoon. I'm wanting to add a striker plate to accommodate my existing sliding door lock. (apparently the original owners of the house had removed them and replaced with a doggie door that slides into the track. Either way. I don't have the striker plate to actually "Lock" this door now. Do I ... (cont.)

I need some help identifying which lock I need. Measuring the distance of the screw holes, I think I need the MULTI-POINT MORTISE LOCK WITH POCKET PLATE, 12"... product 82-260. I have provided a picture of the door and where the lock "was" as it was broken off a few years ago. Also providing a pi ... (cont.)

I need to replace the sliding door handle from the 2 doors 1 with lock and the other one with no lock. Please help me to get the correct parts and lock for my door

Numbers on side: PAT #:6.264.252 and PAT#:5.820.170 This measures 10 1/8 long

The handle with the lock is loose because the socket for the screw snapped. The Screw Holes are 3 15/16" apart. Do you have a Chrome or Brass set that will fit. No idea who manufactured the doors or hardware.

Hi if you don't mind I need help deciding which Keeper that works with my current pull/lock handle. Thanks kindly.

Good Evening - First, thanks for your helpful videos and postings on door hardware. Second, I have a broken patio door lock latch. (Fortunately it is broken in the locked position.) The attached pictures seem to match an 82-089 handle system. The problem is, I need only a bronze latch lever and ... (cont.)

Mortise patio door lock , keyed, JW , chassis PAT# 6.264.252 , PAT # 5.820.170 , inside trim PAT D466787, outside trim PAT # D466787 Sash controls Canton SD Made in June 2010 in Taywan , Amesburry door hardware, Sioux Falls , SD

Will this keeper work for lock number 82-265

My lock broke. Can you help me get the right part please.

I need to find a multi-point strike that is 10 3/4" long x 5/8" wide x 1/2" deep.

Looking for replacement sliding glass patio door jamb catchs