Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

Lock no longer works No part number On lock Only two patent numbers 6,264,252 5,820,170 And DEC 07

I am attempting to obtain a replacement lock for my patio door.

Hi Please I would to know if you have a siding lock door

hi, I recently bought the 82-265 mortise lock. It fit nicely in the sliding door, It doesn't work with the previous latch receiver (the part that it clasps onto at the jamb). Do you have a part I could buy that would work?

The distance between the mounting screws is 11". I operated the one deformed actuator and both arms extended as show in picture 368. There is one lever that operates both evidently. I would like to get a new unit if that is possible.

help

Top and bottom holes on white trim face plate are 11" apart (center) The 2 inside holes on white trim face plate are app 3 1/8" apart The 2 side holes oval shaped that hold handles on are app. 3 15/16" I think I found the right replacement at one point in my search on your website and you show ... (cont.)

Hello I need a replacement for this lock. Thanks in advance for your help.

Sliding door internal lock. Front plate is 11-3/4", holes are 11", distance between latches is roughly 5-7/16.

Please help us find the replacement hardware for this sliding door.

Hello, I recently purchased the 82-239 mortise lock but it didn't line up. The main issues: 1. On the 82-239 there are no holes in the new lock to attach the old white face plate. See attached photo of holes in the old lock and face plate (Circled). 2. The throw on the new latches don't see as dee ... (cont.)

My Tenant removed this and I need to replace it. I don't know what brand it is. It's 8 1/4" tall x 1 1/2" wide. Please respond if you know what brand it is or where I can buy one. Thanks.

Internal mortise lock is just shy of 12" The total of 4 holes for handle is 4" I am missing handle to this.

LOOKING FOR REPLACEMENT HANDLE LIKE THIS ONE DOUBLE LOCK

I need the piece that the lock slides into to lock my new handle wont fit?

We have a Novatech Discretion sliding glass door and the locking mechanism broke. From the measurements we think your product Product Code: 82-265 and Product Code: 82-249 are a match. Can you please take a look and advise?Thank you Shawn

Hi-our sliding glass door handle broke where it's screwed together. Can you recommend a replacement part or should we get a whole new set?

Looking for a replacement lock for a rear slider. It appears to be the SS Multi-Point Mortise Latch and Keeper, Product code 82-259.Or I guess the non-stainless steel version would be the MULTI-POINT MORTISE LOCK AND KEEPER, 9-7/8"Product Code: 82-239

Hello. We are looking for a replacement for a multipoint mortise lock, plate and handle for a Simonton sliding glass patio door. The patent numbers for the lock are 5820.170 and 6.264.252. The length of the internal lock is 10 inches from end to end. Would we also need a new lock plate attached to ... (cont.)

The lock assembly is not moving on the top, it is stationary, seems that the spring is broken. Bottom lock is going into the correct position and secured. Handle is fine, lock device is locking the bottom lock. Would like to replace just the locking mechanism. Found on your website Item # 82-238, ex ... (cont.)