Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

We have a Novatech Discretion sliding glass door and the locking mechanism broke. From the measurements we think your product Product Code: 82-265 and Product Code: 82-249 are a match. Can you please take a look and advise?Thank you Shawn

Hi-our sliding glass door handle broke where it's screwed together. Can you recommend a replacement part or should we get a whole new set?

Looking for a replacement lock for a rear slider. It appears to be the SS Multi-Point Mortise Latch and Keeper, Product code 82-259.Or I guess the non-stainless steel version would be the MULTI-POINT MORTISE LOCK AND KEEPER, 9-7/8"Product Code: 82-239

Hello. We are looking for a replacement for a multipoint mortise lock, plate and handle for a Simonton sliding glass patio door. The patent numbers for the lock are 5820.170 and 6.264.252. The length of the internal lock is 10 inches from end to end. Would we also need a new lock plate attached to ... (cont.)

The lock assembly is not moving on the top, it is stationary, seems that the spring is broken. Bottom lock is going into the correct position and secured. Handle is fine, lock device is locking the bottom lock. Would like to replace just the locking mechanism. Found on your website Item # 82-238, ex ... (cont.)

I just called .. OK that didn't work 82-249 I need the plate that this lock latches into please, what I currently have does not depress the button that allows the lock to engage. Thank youJane

If you've already tried adjusting the hooks, then you might need a new keeper instead; not an uncommon issue with this mortise lock. See our 82-249. Look it over in comparison to your old keeper and let me know what you think.

We recently purchased the patio door handle/lock, part #82-086 (fit perfect, works great, EXCEPT, the idiot that rehabbed this door used the wrong keeper...Does part #82-249, Keeper, work with the door handle/lock set we purchased? If not, what keeper will we require so that we can lock the door wi ... (cont.)

I have a dual sliding glass door set up. 2260 locking lever on left side and just handles on the right side. The latch to lock and unlock has become non-functional and requires minutes of jiggling to get to open. Interior assembly has an upper and lower latch. I wanted to see if this handle set ... (cont.)

Hello, I have a Jeld Wen sliding glass door, and I would like to convert the handle to an exterior keyed locking handle. The spacing on the screw holes is 3-15/16". What options would work for me? The door is 1-1/2" thick. Thanks

Trying to get my door to lock. We bought the house and haven't been able to lock the patio door since. Here are some pictures, the part that goes on the frame that the lock part is suppose to grab on to, seems to be the wrong fit. Please help!

I received my new double mortise lock replacement. It matches with my old keeper, however; the keeper has an indention where the lock release button would hit it and it will not connect. Do you have the keeper for the 82-265?

I am installing a used sliding patio door. Marvin I am pretty sure. Outer dimension of jam is 69 5/8" wide.Depth of channel where striker is mounted is 3/8"I need the striker plate to fit this door.Abbott

Need to replace the mortise double lock mechanism on a sliding glass patio door

Looking for handle and locking mechanism

I need to replace my sliding door keeper. It is exactly like this one 82-249, but mine is a little more proud of the jamb/deeper (it has the same dimensions otherwise). I could put a 1/4" trim piece under the 82-249 part, but if i can buy the exact part, that would be best.

I have a sliding door patio lock that no longer works. The door's still in great condition, but the bottom part of the lock goes from unlocked to locked randomly. I'm not 100% sure what the door model or brand is, but I think it's an Andersen. The attached photos are for the piece I'm trying to repl ... (cont.)

missing locking mechanism

I am looking for a sticker for our screen door lock. Our tenant removed the piece to put in a cat door. The distance between the holes for the screws to put on the plate opposing the lock is just over ten inches and the distance between the two rectangular holes is almost 4 inches as I look at the ... (cont.)

Looking for a lock replacement anyone know where to fine one