Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

I have a Prime window systems sliding door 411 series. Double hook lock stop retraction on one side. will your 82-249 be a match.

Is keeper 82-249 a match for lock 82-265? Thanks!

Hey I am trying to find a keeper for a jeld wen premium vinyl sliding glass door

In need of a strike plate for a win door window series 7000

Trying to locate this lock mech plate that has broken-causes door to get stuck in the closed position. Notice you sell the locking mech, any ideas of where to find the plate?- Appears to be Lock mech style 82-239

Made 12/20/13 in Taiwan QC OASS 2777-00 PAT # 6.264.252 and PAT #5.820.170 10"x 1/2" x 1 1/16

I need to order two (2) mortised hook latches to fit the attached keeper. Can you determine if I need the 82-239 of the 82-265 based on this keeper (and thumb turn) Thanks, Fred

The 2 point mortise lock on our door needs to be replaced. We've had this door for 3 years, and with the part the repair guys keep getting us from Lowe's this will be the 4th replacement. The screws on the handle are 4" apart, the screws on the faceplate are 11" apart (keeping the lock on the door), ... (cont.)

Looking for a replacement lock. Picture enclosed. Lock length 10

Hello, I have this approximately 95x95 Pella glass sliding door in need of parts. Do you have replacement parts for the Lock Strike, the Lock, the interior and exterior door handle and by chance a reference for the rollers on the bottom (I don't have a photo of the bottom track rollers). Attach ... (cont.)

Hello this is my THIRD email trying to find out what part i need. I purchased a house and the previous owners removed the striker plate/keeper. The serial number shows 562#5931 PL#032-137 This is a multi latch as you can see from the picture.. The screw holes where the Striker/Keeper is ... (cont.)

I would like to replace this locking mechanism. Do you know the brand and have a replacement part for it?

My sliding door is not fitted with a keeper and I have the a multi point latch lock without a slam button. The lock is 11" on center between the screw holes (i think similar to 82-259). I have a spare latch that does come with a slam button and unfortunately I can't get the door to latch even with l ... (cont.)

I called you guys on Friday and thought best to use your identifier to help your Expert help me. The contractor who worked substantially on my house and installed these Kasson & Keller doors, has lost the handles and keepers. The factory is nearby and I picked up the supposed keepers which are s ... (cont.)

I have two styles of Superior Windows sliding doors (they are now out-of-business) - 9800 which use the 82-239 mortise lock and 9900 which use something similar. I need to replace the multi-point mortise on the 9900. The dimensions are the same as the 82-239, but the mounting holes for the face plat ... (cont.)

Looking for a dual hook mortise lock. The screw holes for the door are about 9 3/4 inches from center to center. The gap on the receiver end is about 5 5/8 inches. Hole in the door is about 3/5 inch wide and 9 1/4 inches high.

I removed the latch receiver to install a temp cat door. Now I cannot find it. Simonton sliding glass door. Just need the receiver that mounts to the frame so the door can latch. See photos

Hi, need keeper for simonton sliding glass door, part that goes on jamb.

I had a removable vinyl dog door installed here with a separate locking mechanism attached. Now that aim selling my home I need a proper keeper for the mortise lock. Here's some various measurements I took to go with attached photos. It's a Jeld-Wen door, less than 5 years old. Some various door num ... (cont.)

Hello, I am looking for a striker that would work with a two hook slider lock, I have no idea what brand of door this is, I can't find a name anywhere. I've attached pictures of the lock and the place the striker used to be!. Thank you for your help. -norm