Viewing all customer Discussions for:

38-145 Andersen Single Lock

Info on the metal part connected to the window: CR-CN/ALL C2-C45 CW2-CW3 1361409 METAL UNDER WINDOW

I have this casement window which was installed before I bought the home. It seems I miss a small piece to keep the handle on the system. The first picture is the current issue, the second, with white paint on it, has the small steel piece that helps hold the handle.

I need the replacement locking mechanism because the locking lever has broken off. Looks like 41 1/8”Regards

The locking handle is broken and needs to be replaced, thank you!

It was approximately 36 inches centerline from the operating end to the top lock. 135143-L

I am needing this part I found this picture on your website but can not find the part number to order it.

I am having trouble finding an appropriate window latch replacement as you can see ours is broken clean off. Anything will help!

I need a replacement part for the locking mechanism for what I think is an Anderson window. As you see in the photos the tab that attaches the handle to the mechanism is broken. Thanks

Iam looking to replace this part on my window.

This is for left side casement window. The part of the locking component that is attach to the handle is broken. I'm not sure about remove it since it is built inside the wooden fame and I don't see any screws.

I am currently in the process of moving out after selling my house. Since selling the house, we have had two casement lock and bezel kits break on our Andersen Windows. I was inquiring if you have the names above part in inventory (we would need two) and if so how long will it take to receive? We ... (cont.)

Facing window from inside, locking mechanism on right side. Part is 34 1/8" long Andersen window, lifting and lowering handle broke

i believe these are the original windows and the house was built in the early 80s near sacramento california. the interiors are wood and the exterior seems to be clad with vinyl. i will be so appreciative if you can help me find the handle and other parts! thanks.

Need replacement part for Anderson casement window. Window is single section opening to the left with lock on left frame. The part of the lock that the handle clips on to broke off. My research and prior discussion with your staff indicate I probably need either part #38-145 or 146. Pls confirm ... (cont.)

The locking mechanism is broken in this casement window. I cant find any part numbers for the part so I'm hoping you can tell me what parts I need to fix this. Thanks

I have an Anderson 400 casement series window. My daughter pulled off the lock handle and I guess the small metal piece on the lock mechanism that fits into the lock handle tab was broken off and is now missing. I suspect the metal piece is somewhere in her room but appears to be lost. Picture of th ... (cont.)

The photos show the window information, it's a casement window with the crank handle on the bottom and the lock on the side. the one picture is of the lock which still works, but is missing the trim and handle. Can you help me figure out if I need to replace the lock part or can I get a handle to f ... (cont.)

Looking foran Andersen tandem sash (LH) that is 41" long point to point. The part # on the keeper says it is 135143 but your equal part online shows it at 29 1/2". I also included a photo that ahows 7=LH, 8=RH? Please help!

Hi, I'm looking for help to see what replacement part I can get for this lock (the handle broke off from the other window)

Anderson casement window - latch has broken handle stamp on back 0 82208 1