Viewing all customer Discussions for:

S140-06 6 lb Series 140 Quick-Tilt, Single

It looks like the S140 is what I need. Can you tell me if it uses a round or flat pivot bar. The spring code on the old broken spring is a letter F, does that mean its a 6 pound spring?

Is this product (6 lb Series 140 Quick-Tilt, Single Product Code: S140-6) compatible with an MI window Series 1556?

There is a number on the spring 6cb is that the lbs ?

Broken balance spring on left side of sash that needs to be replaced. Need removal and replacement instructions as well. Thank you.

Needing Tension for YKK Windows - Has Number 9 on it - Please let me know if you guys have the tensions needed

Hello, I would like to order 4 balance springs with associated covers and balance drums. My windows weigh 12 lb and were manufactured by Graef of Youngstown, Ohio approx. 15 years ago (Graef is no longer in business). There were no markings on the springs or covers. I would appreciate if you cou ... (cont.)

Spring snapped in two. See two pictures. Also latch right side button has broken off. Third pic was taken from your site. looks like what i need.

I need a window coil balance complete set right and left and two pivot bars see attached photos can you help me in picking up the right parts? thanks

I need a triple coil system with three six pound coils. I haven't been able to find ones on the website that match my current ones, so could you let me know if I just missed it, or what parts I should use as a replacement? The shoe is 1 1/4" wide, 1.5" tall, and 1/2" deep. Photo below. Thank you! ... (cont.)

Balance is marked 6R. Lower sash of an Anlin double hung window, 29"W x 35"H. The sash weighs 13 lbs. Parts look OK except for broken coil, so if possible I'd like to order just the coils (6R and 6L). Thanks!

Attached are photos of the current broken coil window balances installed. I need help identifying the proper replacement parts. The only identifying marks are "6R" on both sides. The parts inside the window sash are approximately 17/32"- 9/16" deep.

Can you help me identify replacement parts for this double coil balance and pivot shoe? This was from a Kohler window S/N 314747002. Measures about 1 1/4" wide and 1/2" thick. About 4 1/2" top-to-bottom (both coils and pivot shoe). Thanks so much!

stamped: 6 ck

We are trying to figure out which pivot shoes and coil balance type this is in order to replace it. Our cheap windows do not have a cut out and we don't currently have a jam spreader to easily take it out and see any numbers. The only thing I saw (in photo attached) was the 6R on the piece screw ... (cont.)

One side of my windows coil and spiral broke. I would like to buy 2 complete set

I need both sides of the window. Springs broke on both. The part number in catalog is 96cq-36RH and left hand also. Note the 6R on the casing.

I can?t get the 6R but I found 7R I am not sure if this 7R fits I need for left and right side for 1 window I have attach couple of pictures as you said please let me know thank you.

Hi! Just showing the housing that the coil I need fits into. Can you tell me what coil to buy. Mine looks like this in the picture, it's 1/2 inch in width and has a 6Y imprinted on it. The end has this little hook on it. Thanks a lot.

https://www.swisco.com 6 lb-single/pd/Series-140-Quick-Tilt-Balance/S140-7

I just ordered the correct parts I need to replace the broken coil balances in the windows of a home I am rehabbing. I am handy and a quick study, but I have never undertaken this task before and I was wondering if anyone has a link to a good tutorial (written or video) to help guide me in replacin ... (cont.)