Viewing all customer Discussions for:

26-119 Sash Release Lever

Looking for tilt latch hardware to fix several barrier windows, I found 1 sticker on a window that said barrier enterprises Inc series 1000, any help would be greatly appreciated

Hello Please see pics of a broken tilt latch. I have seen a tilt latch on your web site # 26-119 Sash Release Lever. Can you please look at my pictures with dimensions and give me your suggestion. Thank you Harold

Just like 26-234 but tangs aren't 7/16 but close to 3/8 and under 1/4 wide But wider than 1/8 white in color

Hi I think I need the 26-119 tilt finger buttons for my windows!

Window release tab to let window tilt inside

I am purchasing the following replacement parts 26-117, 26-118, but I also need the same parts for the upper corner portion of the windows. Can you please provide me with the part number if you have in stock or can I use the same parts without the metal pivot bar? Thank you

Vinyl windows, 18 years old, single slide. the spiral balancer "top" end is malfunctioning on many windows. I do not know the brand of the window. balancers are 28 7/8 inches long, 3/8 in diameter and have a yellow plastic fitting at bottom. I have 16 windows with same spiral balancer-- ... (cont.)

Would you have a replacement part for this slide? MEASUREMENTSt: 1 7/8

I have just ordered several levers (26-119) to replace broken ones in our windows. When they arrive, will it be obvious how to install them? Do they just pop into place? Thank you!

Double hung, tilt-wash window part broken clip 2" L x 7/8" W white plastic

We are looking to replace some broken sash release levers. The top measures 2.5" x 3/4". The forks measure 1/2"w x 3/8"t. Will any of your replacement parts be suitable?

Looking for replacements for Broken latches on vinyl double hung windows

I am in need of a replacement part for my Rusco Window. The piece that broke is the latch that releases the bottom window to fold in. Please see attached photos.

Do you have the tabs in these photos for this style of window? The window is 15 to 20 years old. Thank you. Dennis

Hello, I'm trying to identify my broken latch. From reading other posts, it seems that the latch length and prong type is the most important; yet, it's the hardest for me to measure accurately. I believe the prong is 7/16" and the latch dimenstions are 2" long and 3/4" wide. The color is beige. I ... (cont.)

2 inches long 7/8 inches wide 1/2 inch from leg to leg Close to 1/2 inch leg up and down

Earthwise 7000 series installed in 1998 Model 740 34.124 x 70.25 white The right window tilt latch has broken there are no stamps or markings on the part that came off.

These are vinyl, single hung windows. I need the mechanisms that are slide in. there are 2 on each window to release each side. Thst allow the window to tilt

Hello I am looking for the plastic window latches with snap in slid releases. These are for the windows you see in the pictures, unfortunately there are no names numbers or markings on these windows. I need both the left and right hand sides for a number of these windows. We would appreci ... (cont.)

It looks like part # 26-119 and 26-234 Although you don't provide the measurements for #26-234 between the prongs. All the measurements match mine except the distance between the prongs on my part is 3/8" and your part measures 1/2" between prongs. It may not make a difference. I am repairing Emp ... (cont.)