Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

We need two replacements window operators. The handle is not able to move the windows. It just rotates.

I need assistance identifying this casement operator. Thank you.

Need replacement of this part stripped the turning mechanism.

Hi. My part says 7702. Your 39-013 says 13.5", but my arm is about 9.5". I need a few, so let me know what I should order. Thank you!

Try ing to figure out who's windows are in my house they need a lot of talc

Hello, We need help deciding on which parts to get to replace the the entire crank mechanism (hinge arms, track, operator) on our 1980's Hurd double casement windows (left and right). Could someone help with this? Double casement widow width each 17.5" Hurd windows House built in 1982-4 Thank yo ... (cont.)

Act like the gear is stripped. Both sides acting the same

Can you help us find the correct replacement? What else would you need to know?

I THINK ITS Truth 9-1/2" Right-Hand Square Casement Operator WHITE NEED BY FRIDAY MORNING THANK U

I need a new Hurd window crank. It does not crank out or back in. The handle just circles with no connection to the window as it just swings out after unlocked. We have to push it back from the outside to close it. What part do I need? Thank you!

Have four windows with this. None work- each for a different reason. Some just open, some just close, but not do both. No markings or labels other than symbol on hand crank end.

Need help please. See photos.

Need these two right hand cranks and two window locks this is a condominium community with loads of these windows thinking of starting a business repairing them

Please help to identify

Is there any way to adjust the operator? When you purchase a replacement. Is the handing designated from the inside or the outside of the window? Thank you

printed on the bottom are the numbers 05312004 2341. under these sequence of numbers stamped in the metal there is the number 4 by itself, and then the numbers 45251. I was having a hard time locating this exact part and I am also unsure of the color. please let me know what you think Thanks, Brian ... (cont.)

I see Wright on the metal arm that is approximately 11.5" long. I also saw the numbers 7022 stamped underneath the metal housing

Wright is the label on it. Small crank knob. Opens from left to right so mechanism is on the inside right. Photos are of the window on the left, not the broken on. My name is Michael

I believe this is a Nine inch Arm 9 ( Center of Povot to center of Crank is 9/12 in) Not sure two names listed "Weather shield handle" and "Truth" on crank arm /casting

39-027E operator, I would like to use this operator to replace 1964 Andersen operator 7073a and would like it to fit into existing base molding so I would not have to make new base molding for these windows. I have about 30 windows that I need to change out.