Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Need help please. See photos.

Need these two right hand cranks and two window locks this is a condominium community with loads of these windows thinking of starting a business repairing them

Please help to identify

Is there any way to adjust the operator? When you purchase a replacement. Is the handing designated from the inside or the outside of the window? Thank you

printed on the bottom are the numbers 05312004 2341. under these sequence of numbers stamped in the metal there is the number 4 by itself, and then the numbers 45251. I was having a hard time locating this exact part and I am also unsure of the color. please let me know what you think Thanks, Brian ... (cont.)

I see Wright on the metal arm that is approximately 11.5" long. I also saw the numbers 7022 stamped underneath the metal housing

Wright is the label on it. Small crank knob. Opens from left to right so mechanism is on the inside right. Photos are of the window on the left, not the broken on. My name is Michael

I believe this is a Nine inch Arm 9 ( Center of Povot to center of Crank is 9/12 in) Not sure two names listed "Weather shield handle" and "Truth" on crank arm /casting

39-027E operator, I would like to use this operator to replace 1964 Andersen operator 7073a and would like it to fit into existing base molding so I would not have to make new base molding for these windows. I have about 30 windows that I need to change out.

Can you help find this Truth Hardware tie operator: 3 Cyllindracal roller (middle roller more or less centered in the middle between the other two rollers) 34.9 inches length *It is not part 6-1481-35-3 as middle roller is not centered. What type of Truth Hardware operator is this? The photos show ... (cont.)

The name and number stamped on the assembly is Truth 30382. I really need the right side, but if the interior hardware is different than the picture I should probably replace both the crank and interior cover. If you can, please identify replacement parts. Thanks for your help.

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

I need to replace the crank/operator. Can you help me figure out the parts I need? The window crank unscrews and can open but not shut the window anymore.

No numbers or names just a diamond print on crank handle.

Please advise if you have these exact systems for replacement. Long arm is 9 1/2 ". Crank base is 4" wide and 1.5 " deep. Need it for left opening window as well as right opening window. ( Pict.# 2916, 2917 ). Part # 20810 The 3rd window are pict. #2918, 2919, 2920. (9 1/2" long arm. Base5") ... (cont.)

Window crank broke on Sun Casement window. Will crank out but not back in. Probably need the whole crank assembly. Window was made in 1987.

Do you supply the operator in the attached photo if so I need 15 right and 15 left 9.5 inches? Regards, Kevin

these are 1979 vintage. do you carry the wood covers? Can you identify the crank part number from the photo? is this considered a RIGHT or LEFT hand crank? thanks.

two Monda bay window cranks

The gear on my window crank appears to be stripped right before it completely closes to lock. I have included a pic for reference. The length of the shaft from the line is 11-1/2" and the dimension of the handle housing is 1-3/4" X 4". Please let me know if you can help in finding an exact replaceme ... (cont.)