Viewing all customer Discussions for:

39-028E Ellipse Style Single Arm Operator, 9-1/2"

I recently purchased two replacement operators (39-028E & 39-027E). They fit nicely and will work with the windows. However, the plastic wheel on the end of the new operators did not match the existing tracks. The old tracks and old operators had the thin, flat plastic wheel. Now I need to replace t ... (cont.)

It's a Patriot brand window in my Kitchen

Two-window set in kitchen. Left crank was stripped. May need to replace both for matching pair. Left side has been removed; picture of installed crank is right side.

When turn handle - gearing in base jumped or skipped a gear so unable to open and close. I am the home owner but have an experience handy man guiding me and will do the work.

looking for crank and arm for casement window

Hiya, hope you can tell me what product is same as this: Wright 6077 stamped on both the left and right cranksets. Does anyone make this in stainless steel. Or bronze. Or enamelcoat? Thanks!

This is a double arm operator, with the longer arm about 9". The operator says Wright, and the crank handle says Hurd. The mount is rectangular, and the color is nickle

Hello I have window that were purchased for our home frome Maritime door and window in moncton NB Canada. I need replacement tracking and interior parts for this window. Is this available.

I have about 20 of these to replace, could you suggest a replacement. They are various lengths for different size window but if your able to confirm you have them then I will be in touch with all relevant sizes thank you

looking for replacement operator left side. Centerline to centerline of arm is 9 &3/8".On the arm is printed ULTRA. Also on arm above the ultra is an open circle that is open on top. Arm is 1/2" wide at end and 5/8" wide towards gear. Operator is flat mounted with a choice of 8 mounting holes. It ap ... (cont.)

The one you show is a right hand crank. Do you also have left hand? Is the color a very dark bronze?

For a Weathershiekd casement window. The straight arm operator is identified as manufactured by Wright and from elbow to end is 8 inches long. Can you offer any replacement. Thanks

Trying to replace a Anderson casement window crank assembly #2520 RH. Was wondering if any of your #39-028E cranks would work,even if I had to modify the window with new track.I included a picture of the old crank, the arm is about 10" long. Does the length of the arm determine how much the window o ... (cont.)

I have several operators and handles that need to be replaced. The house was built in 1980. The operators are sill mounted, made by Truth. They are 9.5 inch and have no offset in the arm. There is the number 40056 on the unit. Thanks - Dave

I have 2 different lengths. One set of windows carries a 9 inch arm and the other set carries a 13 1/2 inch arm. I'll need some RH as well as LH Thanks.

I am a licensed General Contractor, wrapping up a remodel on a house we bought to flip, and have it for sale now. In doing final clean yesterday, I noticed the windows had some issues. The windows are BestBilt casement windows, and while most are vertical, some are horizontal. They all appear t ... (cont.)

I need a right and a left 39-028 crank in dark bronze. I only see 1. Do you have both

Looks like 39-255. (9-1/2") arm. Arm is marked 30350. On bottom plate slide mounted to window is marked 358-1R. Do you you have replacements. I need 2 each RH.

They are Semco roll out window parts I am looking for. If you know of something comparable that I can install in my windows that would be a big help, I do not have to have the Semco brand. I am looking for the casements, the pull locks, and the strip on the window, I would like to replace all of the ... (cont.)

Caradco is exactly what I need however I need it to be 11". Do you carry an 11 " Caradco window crank?