Viewing all customer Discussions for:

26-400 Top Sash Pivot Bar, 2-5/16"

Hello,I have 8 windows, mainly upper windows that parts are broken due to the quality of the parts. The lower sashes have different hinges with a sturdier part and they seem fine. I'm wondering if you have any replacement parts or any direction, advice for me. I do appreciate your time in advance. ... (cont.)

please sash length 2 in top, bottom is 2 1/8, pivt bar is 3 in.

Hi, Please see attached pictures of the two pivot bars that I am looking for. These are for windows purchased at Home Depot in 2003 or 2004. In the picture you can see that one has a stamped # 1074. Looking at your website ... it seems that Top Sash Pivot Bar, 2-5/16" Product Code: 26-400 is very c ... (cont.)

We are going back a few years here. I need several. Cam locks appear To be ok

Need a retrofitted pivot that will work. Hate to have to replace the whole window for a pivot. Up above you can see the pivot I need along with the existing shoe that the pivot goes into.

I had both pivot bars from an upper sash fail. I am unable to provide exact dimensions because broken pieces were not recovered. I attach a photo of what I was able to recover as well as the screw hole distance from an identical intact window. Also pictured is the label/sticker from one of the windo ... (cont.)

Hello, I have 2 windows with the same piece of plastic broken at the end of the balancers. And one of them also has a piece of broken metal that is sort of a T-shape. One of the plastic pieces has the number 20 on it and the other has the number 8 and they both have the same patent number on them. ... (cont.)

Broken window clips on 10 windows

This pin snapped while trying to re-install the tilt out vinyl window back into the window frame.

Farley Windows Upper sash pivot pin The total length is 2 1/4" Length from top to 1st hole is 7/8" Length to 2nd hole is 2" This piece is hard plastic. The windows were installed in 2001

1st to pics are pivot bars for top and bottom window. 3rd pic is a screw up and wondering if any way to cover. 4th pic is cover- its hard and brittle do you sell new ones that are a little flexible. Thank you

Hi I would like to replace some broken tilt latches (12 pieces) and pivot bars (12 pieces). I think the tilt latch should be 26-39, but it is discontinued as I checked on the website. So do you have an alternative that I could use? For the pivot bars, I was not able to find a good ones, but I thin ... (cont.)

I believe these are off an anderson silver line 1200 series replacement window. This is the piece that inserts into the counterweight on the upper window.

Hi Swisco, Our tilt window is broken and we are looking to fix it. I'm including an image of the pivot bar (looks like it was cut or broken) and the pivot lock shoe. Could you please suggest what replacement parts we need? The frame doesn't have cutouts, so we would need the separator parts as well ... (cont.)

I'm in search of this pivot bar. I have found ones similar but they need to be longer. 2 and 11/16 total length. I have ordered about 7 different kinds with no luck.

Would you be able to match new hardware for two windows based on the photos submitted. Please advise. Window sash weighs approximately 14 lbs. Thank you J

I have silverline seies 9500 windows I need a pivot bar case for a lower sash My pivot bar is 2 7/16 " long

I need replacement pivot bars for a silver line upper window sash. I don't know the window model number but the pivot bar part number is 1054. First I tried swisco part number 26-400. Didn't fit. The screw holes didn't line up. The I tried part number 26-369. The holes lined up but the flare was too ... (cont.)

Top section of an older upvc window. 2 parts broke off from the side of the window. I need two replacement parts

Hi,Any idea for a replacement? Sadly, i need something this narrow..do you also have the ability to match this item?