Viewing all customer Discussions for:

26-400 Top Sash Pivot Bar, 2-5/16"

as the bottom is broken off and still in the window sill. additionally I see both pivot bar 26-040 and a cast aluminum pin similar to 26-400 I dont see a pattern (all top sill are 040 or all 400) are 040 and 400 interchangeable? the house is built in 2001 - but there are no branding on any ... (cont.)

Hopefully the pictures and the notes help. Ugh!The white tag is the number on the windowThe silver band looks like it says 39W on bothI would need the entire assembly, the metal insert on the bottom which snapped, and the white metal clip which screws into the the trackMy cell is if you would like d ... (cont.)

Hi could you help me fine these two parts for my vinyl window

Hi, Looking for replacement top sash pivot bars. Mine are plastic. The are 2 5/16" long, 3/16" thick, 5/16" wide but the distance between screw holes seems to be about 1 1/8" to 1 3/16". Distance from end to closest screw hole is 7/8" and to farthest screw hole is 2".

All original parts have crumbled and I only have pieces. Looking for 16 replacements to replace in 8 windows. Silverline wouldn't cover under warranty, but provided product number Top pivot pins part# 08-C1074. Hoping you can confirm accurate part. Thanks!

Washing widows and dropped top sash breaking pins

Need to replace four broken sash, pivot pins

Hey there, I'm looking to replace some broken pivot bars on my double hung windows. The broken pivot bars are on the top section of window. These look like "top sash" pivot bars to me. Do you think I would be ordering the right part if I ordered those? -Adam

Hello,I have 8 windows, mainly upper windows that parts are broken due to the quality of the parts. The lower sashes have different hinges with a sturdier part and they seem fine. I'm wondering if you have any replacement parts or any direction, advice for me. I do appreciate your time in advance. ... (cont.)

please sash length 2 in top, bottom is 2 1/8, pivt bar is 3 in.

Hi, Please see attached pictures of the two pivot bars that I am looking for. These are for windows purchased at Home Depot in 2003 or 2004. In the picture you can see that one has a stamped # 1074. Looking at your website ... it seems that Top Sash Pivot Bar, 2-5/16" Product Code: 26-400 is very c ... (cont.)

We are going back a few years here. I need several. Cam locks appear To be ok

Need a retrofitted pivot that will work. Hate to have to replace the whole window for a pivot. Up above you can see the pivot I need along with the existing shoe that the pivot goes into.

I had both pivot bars from an upper sash fail. I am unable to provide exact dimensions because broken pieces were not recovered. I attach a photo of what I was able to recover as well as the screw hole distance from an identical intact window. Also pictured is the label/sticker from one of the windo ... (cont.)

Hello, I have 2 windows with the same piece of plastic broken at the end of the balancers. And one of them also has a piece of broken metal that is sort of a T-shape. One of the plastic pieces has the number 20 on it and the other has the number 8 and they both have the same patent number on them. ... (cont.)

Broken window clips on 10 windows

This pin snapped while trying to re-install the tilt out vinyl window back into the window frame.

Farley Windows Upper sash pivot pin The total length is 2 1/4" Length from top to 1st hole is 7/8" Length to 2nd hole is 2" This piece is hard plastic. The windows were installed in 2001

1st to pics are pivot bars for top and bottom window. 3rd pic is a screw up and wondering if any way to cover. 4th pic is cover- its hard and brittle do you sell new ones that are a little flexible. Thank you

Hi I would like to replace some broken tilt latches (12 pieces) and pivot bars (12 pieces). I think the tilt latch should be 26-39, but it is discontinued as I checked on the website. So do you have an alternative that I could use? For the pivot bars, I was not able to find a good ones, but I thin ... (cont.)