Viewing all customer Discussions for:

39-387 Split-Arm Operator, Wright

looking to replace both (L and R). hand crank attaches to base o window with 2 screws 3 1/8" center to center. total width 4". Arm that attaches to window measures 5 7/16" end to end.

Window cranks/operators. My name is Darryl I sent pictures of the old window cranks The measurements are the exact same measurements as 39-317 And 39 - 318. However the old ones I have are bronze. The ones you sell as a replacement are white. My old ones are Square and yours or rounded. Do y ... (cont.)

Short arm that connects to window from center of hole to center of hole is 3 1/2" and gear arm from center of hole is 4 1/2". See photo for color gold.Appreciate a return call.Thank you.Jim

Hi there, I'm looking to replace the operator assembly for a right-hand casement window (opens to right when viewed from exterior), which appears to have become stripped. The windows and operators are both reclaimed and have no markings on them. As you can see, the arm comes through a hole in the w ... (cont.)

The part of the operator that?s outside the house, exposed to the weather, and goes under the window pane is all rusted. The inside handle bar and the rotary mechanism is fine. Please suggest replacement parts / sub-assembly. Thanks!

window operator wright 40577 i think that is the number on part can you supply?

Single arm operator.

I need to replace this regulator. wright 7701 is stamped on the underside of the regulator. Wight is stamped on the arm.

Need to replace 15-20 window operators I have Wright 7701 on my windows Thanks

Crank is stripped out ...it has a number 31997 and printed Delmar Toronto Truth I need one of those and 2 latches

need replacement operator. Window, 22 years old.

I have a casement window that doesn't crank open or shut .The number on the crank arm is 07800 .What do I need to fix?Wendell

Hi, I have a 07900 that slips out of the rails when opening the window. What hardware do I order? Thanks, Matt

Trying to locate window operator for wright part 07900

Need replacement operating replacement - looking at window from inside - the right - Clad casement - glass id Z27506 Y42C5M - mechanism 6D706 - neighbor said it's a truth arm 31850 on mechanism 45251. So confusedKathie

We previously identified the 39-387 as the operator closest to what would replace my existing stripped operators for 2 windows. As the photos show, I ordered the incorrect handed ones and was about to order the 39-388. While the length of the arm from the gears to the elbow joint look good, the le ... (cont.)

We have four old windows that have this style of window hardware & I'm looking to replace. They say Wright and 07900 on all of them, no matter what size the window. When we have more money, we will replace the entire window, but until then I'd like them to be able to open/close properly. Thank y ... (cont.)

I am trying to replace what looks like a Hurd casement window operator. The photo shows a left opening window that works fine but I have 2 right side opening operators that need replacing. I am wondering if either the 39-035 or 39-317 would be the correct replacement. The outside dimensions of th ... (cont.)

hi sending info for the following parts: i need 7 locking handles, 2 crank handles, 1 operating arm. i am sending the 5 maximum photos allowed and will send additional ones in separate email. thank you richie

I have 3 American Craftsman 7550 C-3 Triple Casement Windows that I purchased from Home Depot in 2007. All 3 windows have the center window operable and list the operating direction as SLS. The home Depot Sku was 481271/S/O Silverline New Construction. All 3 of the opening mechanisms are badly ruste ... (cont.)