Viewing all customer Discussions for:

39-141 Single Arm Crank Operator, 11"

I am a property manager in need of several parts for this type of window please get back with me so I can order parts or complete operating system for this type of window. The single straight arm is 11". It is face mounted like,39-141 but the screws go from the outside toward the inside of the hous ... (cont.)

I need replacement casement window crank operators, both LH & RH, for the type of hardware shown in the attached photographs. The length of the arm looks as if it is 11" (from the center of the button to the center of the mounting body/bracket). The screw holes appear to be on 3-7/8" and 4-3/4" ce ... (cont.)

I am looking for Extra Heavy Duty Crank and Rail to replace the existing crank for steel window which is very old and very stuck. We replaced the original cranks with the ones you see in the photos, however most of them were broken because it is not strong to open heavy window especially when start ... (cont.)

I am trying to find replacement operators to replace several operators that no longer work. The attached pictures are of an original operator. Which side are the hinges on for each hand? I will need both right and left hand operators.The property was built about 1950. The windows are inset in the ... (cont.)

I am a Handyman, trying to fix this window for my customer. There are no markings on the window and, it is not frozen or painted shut. It looks to be a standard window with standard parts. The Tee handle spline is stripped out but, the window cannot be cranked open using vise grips on the operato ... (cont.)

40066. Truth. Slide on window. 13 3/4.

We are doing a large restoration job in VA and will need to replace several, several awning cranks. The attached pics are an example of a typical crank that will be replaced. Please contact me with any questions or if you need more info.

I am trying to locate a control that looks like the one pictured. It measures 11" arm length from the center of the gear crank to the center of the bearing at the end of the arm. This one mounts with screws from behind. Is this a product you have?

I tried these folding handles w/covers for my 39-138, 39-141, 39-142 (white) operators. The spline fits but not the cover. Is there a cover or similar folding handle w/cover for these operators?

Attached photo is from patriot truth 30818. Pls. Call me if you can provide replacement part. Thank you. Jacki M

I know its hard to see from the picture's. When you pick up the operator it is heavy and solid not like the thin die cast. The one in the picture has a 9" arm that will work but 11"arm will be better. We will need 50 left and 50 right and will need one first for approval. Please no delays ... (cont.)

Greetings, I recently purchased two operators (39-022) from your firm but upon receipt found they are not what I need. They are similar in all aspects to my original operators except for the mounting screws; the replacements are mounted from the outside of the frame, while my originals mount f ... (cont.)

US Pat, 4505601 Pat Canada, 1986 UK Pat, 2135397 Above are all of the Pat # i can find in the unit. The locking cylinder that holds the swivaling arm and crank broke (you can see in the picture). It seemed similar enough to this post, my unit has four screws that holds it in place. Please h ... (cont.)

I have more images, if needed. Do you have any of these in stock ? Best regards, Garrison & Ann

I have the same model as the 39-138 and 39-139 but the arm is 1.5" longer (11") instead of 9.5". Do you have the longer or does it really matter? Does the 391xx come in different colors or just the white?

I am trying to purchase 1 39-141 in dark bronze and 1 39-142 in dark bronze 39-142 seems to come only in white and black . These will be installed in the same building can i get right an left in dark bronze the handles come in dark bronze

Hello- The measurements for this part - shaft is 12" long - the width of the black part is 5 1/2". I hope you can help me. All that is says on it is Made in USA (it must be old)

Attached is the hardware we are looking for. Please let me know if you can tell what type it is. JOHN, Service Manager

do you offer this in bronze?

On the arm there is the number 40068. It is a single arm casement operator, but I do not know which exact model number to order from the truth parts catalog.